STEYR LP10E

Tegrat · Post by **Tegrat** » Wed Jan 28, 2015 1:42 pm

My 20 days old electronic Steyr LP10E stopped functioning. Substitution of battery was unusefulll. Did anyone suffered of this problem?

dronning · Post by **dronning** » Wed Jan 28, 2015 4:03 pm

Have you had the grip off? I'd guess the electronic unit has come unplugged. Does the LED flash when you turn it on?

- Dave

django · Post by **django** » Fri Jan 30, 2015 3:28 pm

how is your steyr lp10 E now ? is it OK ?

Tegrat · Post by **Tegrat** » Tue Feb 24, 2015 5:04 am

My Steyr LP10E has been perfectly repaired. The spring has been removed.

argus · Post by **argus** » Tue Feb 24, 2015 5:36 am

Are you referring to the spring that retracts the electronic module cable back into the grip?
Was it the factory or a distributor that suggested removal of the spring?

Silvershooter · Post by **Silvershooter** » Tue Feb 24, 2015 8:06 am

Our Steyr agent in the UK suggests not to remove the spring as the cable can get trapped in the grip and break, needing a replacement board.
I had a XL grip on my LP10E and the spring was too tight so I threaded a short rubber band on to the end of the spring and over the cable to create the right amount of tension to retract the cable.

dronning · Post by **dronning** » Tue Feb 24, 2015 11:23 am

I stretched my spring so it still retracts the wires but doesn't pull so hard. Seems to work ok.

- Dave

argus · Post by **argus** » Tue Feb 24, 2015 5:12 pm

Both good ideas, thank you.

TargetTalk

STEYR LP10E

STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E

Re: STEYR LP10E