Opinion wanted about centerfire pistol

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
CamelNL
Posts: 93
Joined: Wed Aug 17, 2011 10:45 am
Location: Netherlands - Twente

Opinion wanted about centerfire pistol

Post by CamelNL »

I have a luxury problem. I want to buy a centerfire pistol (.32). I already own a Walther SSP. I got 2 options; 1, a walther GSP with a .32 and .22 or a Match Guns MG4. Both aprox. 1500 euro in my country.

Things i wanna keep in mind: I want to keep my SSP and it will be my primary pistol to shoot with. I never hold a GSP, the MG4 instead has a nice grip (bit like the SSP)

What would you guys do?

Have a nice weekend!
Trooperjake
Posts: 794
Joined: Sat Dec 18, 2010 9:22 pm
Location: Cookeville, TN

Re: Opinion wanted about centerfire pistol

Post by Trooperjake »

Buy a pardini...
dronning
Posts: 557
Joined: Wed Feb 13, 2013 8:56 pm
Location: MInnesota

Re: Opinion wanted about centerfire pistol

Post by dronning »

Trooperjake wrote:Buy a pardini...
+1 you should at least consider the Pardini.

- Dave
Certified Safety Instructor: Rifle & Pistol
They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~ Ben Franklin
CamelNL
Posts: 93
Joined: Wed Aug 17, 2011 10:45 am
Location: Netherlands - Twente

Re: Opinion wanted about centerfire pistol

Post by CamelNL »

I considered it but the service here in The Netherlands is bad, and if i recall properly the 32 from pardini aint that good as the .22 caliber.
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Opinion wanted about centerfire pistol

Post by Leon »

Manurhin MR73 Match in .32

But if you can find one, a Toz 49.

Also consider a FAS 603. These are awesome...
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

The Manurhin would be my first choice for Centrefire however if you would like two pistols to match regarding balance and grip and you will definitely continue using the Walther SSP then I would go with the MG4.
User avatar
conradin
Posts: 1999
Joined: Sun Apr 29, 2012 1:18 am
Location: Basement.

Re: Opinion wanted about centerfire pistol

Post by conradin »

Leon wrote: But if you can find one, a Toz 49.
Where can you find one?
User avatar
conradin
Posts: 1999
Joined: Sun Apr 29, 2012 1:18 am
Location: Basement.

Re: Opinion wanted about centerfire pistol

Post by conradin »

GSP is a known winner...why don't find one and try first before asking? It is not a hard pistol to find.
User avatar
conradin
Posts: 1999
Joined: Sun Apr 29, 2012 1:18 am
Location: Basement.

Re: Opinion wanted about centerfire pistol

Post by conradin »

Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Opinion wanted about centerfire pistol

Post by Leon »

conradin wrote:
Leon wrote: But if you can find one, a Toz 49.
Where can you find one?
Not in the US ! I doubt that there are any there.

I had 4, including one NIB. Have sold that and have just sold another one ( today actually ).

You will have to google, keep on googling and then import one yourself. One of mine came from Switzerland, the other from the Czech Republic and the remaining two I purchased in Australia.
User avatar
SamEEE
Posts: 505
Joined: Mon Aug 12, 2013 7:48 am
Location: Aotearoa/NZ

Re: Opinion wanted about centerfire pistol

Post by SamEEE »

Leon wrote:You will have to google, keep on googling and then import one yourself. One of mine came from Switzerland, the other from the Czech Republic and the remaining two I purchased in Australia.
Do you have any pictures of that NIB Toz 49? I notice that a lot of impressive centrefire scores in Australia are shot with Revolvers.

Mostly self loaders over this side of the ditch - 50/50 split Pardini/Walther roughly

OP: It's pretty hard to go wrong with Centrefire guns. I like GSPs - they have a very upright grip is the only peculiar thing.
Avoid Unique DES-32. They crack slides and frames. I currently am shooting the probably the last one in New Zealand which isn't cracked.
Image Image
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

My favourite CF pistol. The Manurhin MR.32 Match.
Attachments
image.jpg
image.jpg (42.26 KiB) Viewed 3217 times
Spencer
Posts: 1890
Joined: Fri Feb 24, 2006 9:13 pm
Location: Sydney, Australia
Contact:

Re: Opinion wanted about centerfire pistol

Post by Spencer »

A big lump of lead is inherently more stable than a smaller lump of lead

Most target .32calibres are OK out to 25m (if the barrel twist is fast enough), but, all things being equal, .38calibre is more consistent.

This from a shooter who usually lives with the occasional flyer in .32S&W Long
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

A big lump of lead is inherently more stable than a smaller lump of lead

Most target .32calibres are OK out to 25m (if the barrel twist is fast enough), but, all things being equal, .38calibre is more consistent.

This is the science behind .32 / .38 accuracy, however after owning both calibres at the same time I was more comfortable and scored considerably higher with the .32 ....for my style at least.
This picture is of the 5/1/4" MR 73 Sport in .357/.38 spl.
Attachments
image.jpg
image.jpg (34.33 KiB) Viewed 3208 times
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Opinion wanted about centerfire pistol

Post by Leon »

SamEEE wrote:
Leon wrote:You will have to google, keep on googling and then import one yourself. One of mine came from Switzerland, the other from the Czech Republic and the remaining two I purchased in Australia.
Do you have any pictures of that NIB Toz 49? I notice that a lot of impressive centrefire scores in Australia are shot with Revolvers.

Mostly self loaders over this side of the ditch - 50/50 split Pardini/Walther roughly

OP: It's pretty hard to go wrong with Centrefire guns. I like GSPs - they have a very upright grip is the only peculiar thing.
Avoid Unique DES-32. They crack slides and frames. I currently am shooting the probably the last one in New Zealand which isn't cracked.
Will post a picture on the NIB Toz 49 tonight. It has actually been sold though.

"I notice that a lot of impressive centrefire scores in Australia are shot with Revolvers. " A Russian shooter set the new World Centrefire Record (594/600) with a Toz 49 at the ISSF World Championships in Munich in 2011 or 2012. I also believe that the world record in CISM ( military centrefire ) is held by a Toz 49, likewise the previous 2 world CF records.....
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

A Russian shooter set the new World Centrefire Record (594/600) with a Toz 49 at the ISSF World Championships in Munich in 2011 or 2012. I also believe that the world record in CISM ( military centrefire ) is held by a Toz 49, likewise the previous 2 world CF records.....
Do you know the calibres of the Toz pistols that were used for the world records Leon ?
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Opinion wanted about centerfire pistol

Post by Leon »

They were all in the original 7.62 Nagant Short calibre..

I personally don't see the point in having these re-chambered to .32 S&W L and am mystified by those who have done so...
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

Thanks. Any sellers remorse regarding the NIB TOZ and secondly do you have any left ?

p.s. I'm with you regarding re chambering.
Leon
Posts: 834
Joined: Mon Jul 07, 2008 4:04 am
Location: Sydney, Australia

Re: Opinion wanted about centerfire pistol

Post by Leon »

No sellers remorse whatsoever.

I had 4 Toz 49s and a Toz 36 ( things got a bit out of hand ). I'm keeping 2 Toz49s and the Toz36.
User avatar
deadeyedick
Posts: 1194
Joined: Thu Jan 24, 2008 5:55 pm
Location: Australia

Re: Opinion wanted about centerfire pistol

Post by deadeyedick »

Thanks everyone for your informative comments. From them I gather that the TOZ 36 would need a new cylinder in order to shoot .32 S&W Longs. However, I am still confused about the different original cartridges. It seems like there must be THREE different 7.62 Nagant cartridges: the original 7.62 Nagant for the 1895 (date?) Nagant revolver whose cylinder moved forward into lockup, the 7.62 Nagant Short for the TOZ 49, and the 7.62 Nagant Long for the TOZ 36? Is this correct? Do the cylinders of the TOZ 49 and 36 move forward at lockup like the old Nagant revolver's cylinder does? Are the 7.62 Nagant Short and Long cartridge bottle neck cases, like the old 7.62 Nagant? At this point, I'm mostly just curious.
These questions were asked some time back. Any help Leon ?
Post Reply