S&W 52/1 reloading

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
ser2711
Posts: 48
Joined: Wed May 28, 2014 10:06 am
Location: Milano, Italy

S&W 52/1 reloading

Post by ser2711 »

Hi! I still use S&W 52/1 for Centerfire competition.. which is the best and accurate reloading for this pistol?..as powder Norma R1 2,5 grains no more avalable in Italy. Thank you!
NuJudge
Posts: 36
Joined: Sun Dec 25, 2005 7:31 am
Location: SE Michigan

Re: S&W 52/1 reloading

Post by NuJudge »

R1 has not been sold here in the US for better than 10 years, so not a lot of us have any recent experience with it. It has a burning rate that is about the fastest ever made, so powder charges will be very light.

All the old links I have for this powder are dead. Sorry.
User avatar
Gort
Posts: 237
Joined: Sat Jan 21, 2006 10:07 am
Location: Michigan, USA

Re: S&W 52/1 reloading

Post by Gort »

Alliant Bullseye 2.5gr. to 2.8gr.
Winchester WST 2.6gr. to 2.9gr.
All with a 148 HBWC seated flush with medium to medium heavy crimp.
Good Shooting, Gort
Rover
Posts: 7055
Joined: Sat Nov 15, 2008 4:20 pm
Location: Idaho panhandle

Re: S&W 52/1 reloading

Post by Rover »

Both my M52 and Colt .38 Spec. conversion shot most accurately with 3.2 gr of 700X and a Speer HBWC (now changed in design).
sobakavitch
Posts: 89
Joined: Fri Feb 01, 2008 5:08 pm

. . . .

Post by sobakavitch »

. . . .
Last edited by sobakavitch on Tue Oct 24, 2017 7:54 pm, edited 1 time in total.
OlavM
Posts: 12
Joined: Sun Dec 07, 2014 3:51 pm

Re: S&W 52/1 reloading

Post by OlavM »

Hi.
Try VV N310, an exellent powder for light targetloads in .32 and .38 (and .45acp)
It`s the fastest burning powder from Vitavouri.
dronning
Posts: 557
Joined: Wed Feb 13, 2013 8:56 pm
Location: MInnesota

Re: S&W 52/1 reloading

Post by dronning »

Clays 2.4gr with Remington 148gr HBWC

My 52-2 loves it.

- Dave
Certified Safety Instructor: Rifle & Pistol
They that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~ Ben Franklin
Post Reply