Reloading Component_Current Sources

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

User avatar
Dipnet
Posts: 249
Joined: Tue May 27, 2014 3:21 pm
Location: Gainesville, Florida

Re: Reloading Component_Current Sources

Post by Dipnet »

Clarence,
Thanks for verification of the Bullseye load. I just started shooting a 6-inch GT45 and besides the longline load using 185 Zero JHP over 4.6gr Bullseye (or 4.5 gr. VV N310), I wanted explore loads using 160gr Quality cast bullets for the short line. GT45s are a little finicky about the bullets they shoot (don't like long nose LSWC); however, the 160gr Quality bullet has a short beveled nose and is supposed to load and shoot well on the short line (over 4.7gr Bullseye).(http://www.qualitycastllc.com/#!products/ce9e)

I have never used WST; no particular reason, just never tried it. Cheers, dipnet
Ttgoods
Posts: 194
Joined: Sun Sep 01, 2013 6:43 am

Re: Reloading Component_Current Sources

Post by Ttgoods »

Try Penn Bullets truncated cone.
Post Reply