I need a very quiet AR for practicing in a room below a bedroom of a light sleeper. Any match rifle models that are or can be made whisper quiet?
Same need for air pistol. Obviously dry fire is quiet but sometime I like to punch a few 10 and x's. :)
Need a quiet precision air rifle
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
It's more the trap you have to worry about. Air rifles are pretty quiet, but a metal or lexan backstop makes way more noise if you don't dampen it.
The only practical way I can think of to make a competition air rifle quieter is to add a bloop tube, and in terms of the rules, there's only so much you can add.
The only practical way I can think of to make a competition air rifle quieter is to add a bloop tube, and in terms of the rules, there's only so much you can add.
Duct Seal Trap
I am using duct seal in a trap to dampen the target. No issue with noise from the impact.
-
Guest
Re: Need a quiet precision air rifle
Older spring-piston air rifles are much more quiet than any of the later designs. You won't give up accuracy with a good springer, either.montster wrote:I need a very quiet AR...Obviously dry fire is quiet but sometime I like to punch a few 10 and x's. :)
Spring air pistols are also quiet, but are unfortunately challenged by size and weight.
The guys I shoot silhouettes with put rubber gromets from the hardware store in the blupe tube. They space them an inch from the end of muzzle and then every inch after that and they are very quiet. I shot next to a guy with an Air Force Edge that did that and the only thing you could hear was the trigger go click. And then the clang of the metal silhouette being hit. It was completely silent. Scott
Re: Need a quiet precision air rifle
Over a silenced pcp, a springer will be louder even when silenced as the action itself creates a lot of noise.Anonymous wrote:Older spring-piston air rifles are much more quiet than any of the later designs. You won't give up accuracy with a good springer, either.montster wrote:I need a very quiet AR...Obviously dry fire is quiet but sometime I like to punch a few 10 and x's. :)
Spring air pistols are also quiet, but are unfortunately challenged by size and weight.
The bloop tube idea sounds good if a silencer can't be fitted... if the target trap is quiet, then this will be the only sound. Various AR's will be different in how they project the sound due to muzzle design, but they will be of the same order unless they have any silencing.
I used one rubber faucet washer on the end of my Anschutz 9003, and it cut the report by about 1/2. You can also but a true silencer for air rifle, but I think it must be permanently attached. They are legal for air guns, but if they can be removed and used for powder burners, the BATF would consider that a federal crime in the USA.SMBeyer wrote:The guys I shoot silhouettes with put rubber gromets from the hardware store in the blupe tube. They space them an inch from the end of muzzle and then every inch after that and they are very quiet. I shot next to a guy with an Air Force Edge that did that and the only thing you could hear was the trigger go click. And then the clang of the metal silhouette being hit. It was completely silent. Scott