Page 1 of 1
SCATT not registering shots
Posted: Sat Mar 19, 2022 3:30 pm
by Kokssik
Hello,
We have an old SCATT W-01 at out club, but we cannot set it up. First it didn't work at all, now when I used a new computer it works, in the calibration it shows where I am aiming, but when I shot (dry fire air pistol) it doesn't register that I pulled the trigger. No blue circle ever appeared. Do you have any suggestions on what the problem could be?
Re: SCATT not registering shots
Posted: Sat Mar 19, 2022 7:01 pm
by lyoke3
I am not sure on the W-01 model. Is this the USB model with the frame?
If it is showing where you are aiming then I would look at the sensitivity when you are calibrating. There should be a few different settings and it may need to be more sensitive.
Re: SCATT not registering shots
Posted: Sun Mar 20, 2022 1:33 am
by Th.
Do you have the newest software installed?
Re: SCATT not registering shots
Posted: Sun Mar 20, 2022 5:22 am
by Kokssik
lyoke3 wrote: ↑Sat Mar 19, 2022 7:01 pm
I am not sure on the W-01 model. Is this the USB model with the frame?
If it is showing where you are aiming then I would look at the sensitivity when you are calibrating. There should be a few different settings and it may need to be more sensitive.
That helped, thanks. Yes it's the IR USB version with a frame.
Re: SCATT not registering shots
Posted: Sun Mar 20, 2022 2:59 pm
by Ramon OP
Update the firmware too (target and device).
Re: SCATT not registering shots
Posted: Mon Mar 21, 2022 3:40 am
by ddk576
I' d suggest you update to the newest software just as Th. has advised