LP10E misfire
Posted: Thu Jun 15, 2017 8:46 pm
I have been doing a lot of dry firing recently, just triggering to release the solenoid with the action closed not engaging and releasing the striker each time. I have recently started having issues in live fire where occasionally it will take 2 or 3 pulls of the trigger (you can hear the solenoid click each time) to release the shot. First thing I tried was to replace the batteries but no improvement.
Has the dry firing somehow weakened the solenoid?
What if any maintenance/lubrication is recommended for the solenoid?
I also intend to do a complete pull down to inspect / clean / lubricate the firing mechanism but have one question regarding part (80) - Catch Detent on the schematic. Part (81) pressure spring acts on the catch detent (80) and is held in place by a screw (78). Aside from trying to count the number of turns that screw (78) is currently engaged by when disassembling, what is the correct method for setting the load on the pressure spring (81) when I reassemble?
Thanks for your help.
Has the dry firing somehow weakened the solenoid?
What if any maintenance/lubrication is recommended for the solenoid?
I also intend to do a complete pull down to inspect / clean / lubricate the firing mechanism but have one question regarding part (80) - Catch Detent on the schematic. Part (81) pressure spring acts on the catch detent (80) and is held in place by a screw (78). Aside from trying to count the number of turns that screw (78) is currently engaged by when disassembling, what is the correct method for setting the load on the pressure spring (81) when I reassemble?
Thanks for your help.