Page 1 of 1
Pardini GT45 (.45 Auto) ammo choice
Posted: Sat May 13, 2017 3:41 pm
by bsp001
Anyone have any suggestions or has good experience with a particular ammo for Pardini GT45 in .45 Auto?
I have had good results with Fiocchi Black Mamba 185gr FMJTC and Geco 230gr JHP.
Thanks.
Re: Pardini GT45 (.45 Auto) ammo choice
Posted: Sat May 13, 2017 6:06 pm
by fc60
Greetings,
I had one several years ago. It was very fussy when shooting a bullet with a pronounced shoulder. The ejected round would catch on the shoulder causing a malfunction.
I did shoot some Remington Factory 185 TargetMaster ammo with no problems.
PardiniUSA suggest using a bullet with a "truncated nose" if loading with cast bullets.
The groove diameter on my pistol was 0.450" with eight lands.
Cheers,
Dave
Re: Pardini GT45 (.45 Auto) ammo choice
Posted: Sat May 13, 2017 9:17 pm
by machinist mike
I have been using the zero 185gr lead semi wadcutter hollow point (LSWHP). My load is 5.3 gr Winchester WST and the OAL set at 1.250, and I use a taper crimp die setting the crimp at .470. Feeds well, fits in the magazine, and has good accuracy.
Re: Pardini GT45 (.45 Auto) ammo choice
Posted: Mon May 15, 2017 6:05 pm
by Zipp0
fc60 wrote:Greetings,
I had one several years ago. It was very fussy when shooting a bullet with a pronounced shoulder. The ejected round would catch on the shoulder causing a malfunction.
I did shoot some Remington Factory 185 TargetMaster ammo with no problems.
PardiniUSA suggest using a bullet with a "truncated nose" if loading with cast bullets.
The groove diameter on my pistol was 0.450" with eight lands.
Cheers,
Dave
Interesting, I had the same problem but it was cured by making the rounds hotter