TargetTalk

Looking for recommendations on 32bullet mold for 32sw-for gsp , thank you

Greetings,

Consider a Saeco #323 in four cavity.

The RCBS 32-098-WC shoots well; but, is only available in 2-cavity.

If you have a stock Walther GSP-C, or GSP-C Expert, odds are the barrel measure 0.3135" +.

Size the as cast bullet to 0.314".

Use a soft lube, like NRA 50-50, Alox-Beeswax.

Cast with a soft Lead alloy, about 8-10 BHN

Lapua brass and 1.65 grains of Winchester WST have worked well for me in the past.

Happy casting, there are not many of us left.

Cheers,

Dave

I'm getting good results with the Magma Engineering 93gr button nose flat base wadcutter.

I like exactly what Dave (FC60) recommended. I like alox 50/50 but some seem to come out of the grooves too easily, specifically Lars Alox 50/50. I use the Lars 2500 instead and it seems to work well. Before this I exclusively used 50/50 in other brands and was happy.