Page 1 of 1

Second Knob on Anschutz Front Sight

Posted: Sat May 09, 2015 2:23 pm
by mtncwru
Does anyone know what the purpose of the extra knob on the left side of my Anschutz front sight is for?

Image

Re: Second Knob on Anschutz Front Sight

Posted: Sat May 09, 2015 4:04 pm
by salar600
simetrical sight picture

Re: Second Knob on Anschutz Front Sight

Posted: Sat May 09, 2015 5:39 pm
by Andre
I agree with Solar, but it might also be beneficial to leveling if you don't use a level.

Re: Second Knob on Anschutz Front Sight

Posted: Sun May 10, 2015 2:45 am
by Tim S
Surely the sprung wire that pokes into the tunnel does that already, and much better?

Would it allow the tunnel to be mounted backwards?

Re: Second Knob on Anschutz Front Sight

Posted: Sun May 10, 2015 8:31 am
by ShootingSight
I think one clamps the sight base onto the barrel, the other clamps the sight tunnel to the sight base. In other words, if you loosen it, you can rotate the tunnel on the sight base slightly, in case you like to hold a canted rifle.

Re: Second Knob on Anschutz Front Sight

Posted: Sun May 10, 2015 11:54 am
by mtncwru
As far as I can tell, the screw in question does nothing mechanical. The screws to control cant are in the front (or the rear, as there's no reason you can't mount the sight backwards). The "symmetrical sight picture" suggestion from salar600 makes the most sense, I think.

For leveling I would use an iris/insert with bars, since the spring wires inside are more sensitive to bending. Though in my case (shooting prone free rifle) I would just use a level :-)

Re: Second Knob on Anschutz Front Sight

Posted: Sun May 10, 2015 2:15 pm
by Andre
ShootingSight wrote:I think one clamps the sight base onto the barrel, the other clamps the sight tunnel to the sight base. In other words, if you loosen it, you can rotate the tunnel on the sight base slightly, in case you like to hold a canted rifle.
The Anschutz m18 front sight does have the ability to cant, but that's not the adjustment screw. The two locking cant screws are located on the muzzle end between the bottom of the tube and the female dovetail.

Re: Second Knob on Anschutz Front Sight

Posted: Mon May 11, 2015 8:57 am
by BR1942
Is to hold the mírage band if used on a center-fire rifle.

Re: Second Knob on Anschutz Front Sight

Posted: Mon May 11, 2015 12:58 pm
by redschietti
I have one just like it. Its just a "pretty" that makes the sight picture symmetrical

Re: Second Knob on Anschutz Front Sight

Posted: Mon May 11, 2015 3:17 pm
by JasonM
It's nice that someone else is asking this question and that there are some on here who also aren't aware of what that's form. I spent about an hour after I got my first sight like that trying to figure out what that was for, before I actually read about it and saw that it was only for symmetry in the sight picture. :)

Re: Second Knob on Anschutz Front Sight

Posted: Mon May 11, 2015 3:38 pm
by mtncwru
That makes perfect sense, since your eye would be drawn to the part that's different. Thanks everyone!

Re: Second Knob on Anschutz Front Sight

Posted: Wed May 13, 2015 9:58 am
by BR1942
Faithless people !!!

Image
Image