Page 1 of 1
Source for tall rings for a scope with 30 mm tube
Posted: Thu Apr 02, 2015 7:05 pm
by nemo
Greetings all,
I need rings for 11 mm dovetail at least 1.5 inches tall for a scope with 30 mm tube. Can you please recommend a source for such rings?
Thank you,
N
Re: Source for tall rings for a scope with 30 mm tube
Posted: Thu Apr 02, 2015 7:32 pm
by mgdietrich
I think you could get a pair of Kelbly smallbore rings that would work. Google their webpage, look for rings/bases.
Re: Source for tall rings for a scope with 30 mm tube
Posted: Thu Apr 02, 2015 7:57 pm
by patriot
I recently used a set of Weaver to 11 mm adapters for 30 mm Burris Signature Rings; worked very well.
http://www.amazon.com/UTG-Dovetail---Pi ... il+adaptor
Re: Source for tall rings for a scope with 30 mm tube
Posted: Fri Apr 03, 2015 11:57 am
by nemo
Hi mgdietrich,
awesome, this will work. Thank you very much.
Kindest regards,
N
Re: Source for tall rings for a scope with 30 mm tube
Posted: Fri Apr 03, 2015 12:08 pm
by mtncwru
A set of BKL risers and a set of BKL 30mm tall rings should just about do it for you, too. I use BKL rings for my match rifle, and I've never had trouble with repeatability of zero. BKL also makes an 11mm to Weaver/Picatinny option, so you're not limited to the 11mm rings; you could find a set of Weaver rings that, in combination with your risers, give you the necessary height.