Page 1 of 1

Questions about Remington 540XR

Posted: Thu Jan 30, 2014 12:45 pm
by lev
Hi,

Could anyone tell me about the Remington 540XR trigger and accuracy?

I like to shoot with 5oz trigger, can the 540 be adjusted like that?

Best regards,
Ivan

Posted: Thu Jan 30, 2014 1:00 pm
by Marc Orvin
No. The 540xr has about a 3# trigger at best, usually worse. The trigger can not be safely modified to go lower than this without experiencing slam fires when the bolt is closed.

I'm sure someone will be along directly to explain that I am wrong. That's OK. Your mileage may vary.

The accuracy is pretty fair.

There are a lot of better ways to spend your money than trying to make a 540xr into a match rifle.

Posted: Thu Jan 30, 2014 9:21 pm
by lev
Thank you Marc, what would you recommend?

Kind regards,
Ivan

Posted: Thu Jan 30, 2014 9:34 pm
by richrd
I have done two 540 triggers to get a clean break at 12 to 16 oz.

the accuracy in both guns is very respectable and not picky about ammo, even with the pinned barrels.

but then I do trigger jobs on 10/22 also. my mileage ain't bad.

Posted: Thu Jan 30, 2014 11:47 pm
by Invictus87
I have a 540xr, got it for $275 in a 540x stock, exposed bluing all brown, with sights, sling, and handshop. Definitely a bit rough, but it's a good shooter, and more accurate than a rifle that cheap should be. I don't know what the trigger weight is, but it's fairly light and consistent. I can't adjust it any lower, but it's not 5oz.

Posted: Sat Feb 01, 2014 1:30 am
by lev
Thank you both richrd and Invictus87 for your help.

Kind regards,
Ivan

Posted: Sat Feb 01, 2014 8:06 am
by richrd
please note, in our litigation minded society, I am not suggesting that anyone try to alter anything on their rifle.

But to expand on the accuracy, a friend shot .22 silhouette with a 540 and his wife with a m54. at the same time my wife used a 540 and I used a 40x. Off a bench, either 540 would beat the more expensive rifles.

Posted: Sun Feb 02, 2014 11:10 pm
by lev
Thank you richrd, I really appreciate your help.

Kind regards,
Ivan

Posted: Mon Feb 03, 2014 1:22 pm
by brent375hh
I had one in the 70's. It shot a round one hole group with Green Tag at 50 feet. The trigger was 3# and I don't think it was designed to go much lower.

It cost $158 new and was a good 50' galley gun for the money.

Posted: Mon Feb 03, 2014 10:16 pm
by lev
Thank you for your input brent375hh

I have one question, when you say 3#, what does the # mean?,English is not my first language and and donĀ“t understand this symbol when it comes to talking about guns.

Best regards,
Ivan

Posted: Mon Feb 03, 2014 11:34 pm
by brent375hh
# = pounds. Accurate rifle but the trigger was no Anschutz.

Posted: Mon Feb 03, 2014 11:55 pm
by lev
brent375hh wrote:# = pounds. Accurate rifle but the trigger was no Anschutz.
Thank you,

Ivan

Posted: Wed Feb 05, 2014 9:10 am
by grynerfan2
Brian Voelker is quite well known for his work on the 540XR & can tune triggers down to 9-11 oz. as well as other needed services. Google his name + gunsmith.

Posted: Wed Feb 05, 2014 11:16 am
by lev
Thank you grynerfan, something I forgot to mention, I live in Mexico, and wanted to know the safest and lowest trigger setting, so I can decide if it was worth spending 1,000 dls on it.

With kind regards,
Ivan