Page 1 of 1
How High To Hang 10M AP Target?
Posted: Thu Oct 24, 2013 10:15 pm
by breakfastchef
What is the regulation height one should hang a 10M AP target? Yes, newb-type question; please bear with me. I have searched for this information on the Web and never came up with an answer.
Posted: Thu Oct 24, 2013 10:31 pm
by rmca
6.4.6.1 Height of Target Centers
Target centers must be within the following heights when measured from the level of the firing point floor:
Range Standard Height Variation Allowable
300m 3.00 m +/- 4.00 m
50m 0.75 m +/- 0.50 m
25m 1.40 m + 0.10 m / - 0.20 m
10m 1.40 m +/- 0.05 m
50m Running Target 1.40 m +/- 0.20 m
10m Running Target 1.40 m +/- 0.05 m
All target centers within a group of targets or range must have the
same height (±1 cm)
Get the full rules here:
http://www.issf-sports.org/theissf/rules.ashx
Hope this helps
Information Greatly Appreciated
Posted: Thu Oct 24, 2013 10:34 pm
by breakfastchef
Thank you. I bookmarked the ISSF link you provided.
Posted: Fri Oct 25, 2013 10:14 pm
by Rover
Forward this to Conradin if you please.
Posted: Sat Oct 26, 2013 1:16 pm
by rmca
Rover wrote:Forward this to Conradin if you please.
:)
Posted: Sat Oct 26, 2013 10:27 pm
by ihasagun
http://www.pilkguns.com/buildrange.shtml
That says 55 inches height for the 10 ring. So that's what I did.
Posted: Sun Oct 27, 2013 11:37 am
by rmca
55 inches x 2,54 = 139,7cm » 1,397 meters (for those who don't speak metric)
It´s within the tolerance allowed. Your range is ok.
Hope this helps