Page 1 of 1
Pardini PGP 75 1st version manual
Posted: Thu Nov 01, 2012 9:18 pm
by tqb
Hello,
I recently bought a Pardini PGP 75 free pistol, but the trigger is diferent from the one present in the official Pardini manual and diagram avaliable in the Pardini website.
In my pistol the screws to regulate the "trigger roll" and trigger presure F & G) are not bellow the trigger (at a 45º angle), but underneath the trigger assembly (at a 90º angle) being acessible through a premade hole in the bottom of the extended part of the grip.
Does any body have the manula for this version?
If not can anybody tell me which is the F and G screws?
I know I can always fidle with them, but I don't want to take the risk...
Thank You,
Posted: Sat Nov 03, 2012 2:54 pm
by tqb
I've found the manual under the foam in the pistol case.
It is in fact diferent from the one avaliable from the Pardini website.
I has a diferent trigger assembly, with corresponding pictures.
If Pilkguns wants to put it in the 10P Files please notify me.
Thank You.
Posted: Sat Nov 03, 2012 3:50 pm
by Rover
Did the gun blow up when you fiddled???
Posted: Sat Nov 03, 2012 4:31 pm
by tqb
:)
Actually I didn't fiddle with it.
The trigger weight is good for now. I'm not experienced enough to change it yet.
I'm still used to the 500g of the Air pistol, so the trigger seems light enough. Should have 200g or less...
But I did found out that buying a used gun has its challenges.
I was having trouble adjusting the elevation, maxing out the settings. I afterwards found that the previous owner had installed the front sight too low. After the correct installement I was able to adjust the elevations to my requirements.
Thanks.
Posted: Sun Nov 04, 2012 8:01 pm
by paw080
tqb wrote:I've found the manual under the foam in the pistol case.
It is in fact diferent from the one avaliable from the Pardini website.
I has a diferent trigger assembly, with corresponding pictures.
If Pilkguns wants to put it in the 10P Files please notify me.
Thank You.
HI TQB,
SO, what does each screw adjust? I'm getting the same version
in about a week, and nobody seems to remember what each screw affects.
Also, I think it's up to you to notify and ask Scott P. I'm sure He'd be glad to
add your info. I've also done a lot of online research, finding diagrams and
manuals for the wrong version. Thanks in advance for your response,
Tony
Posted: Sun Nov 04, 2012 11:07 pm
by prowling
And Rover: Is this the same version as the "Green Cheese" PGP-75 that LesJ is selling me? If so, I would be onboard for a copy of the manual as well.
Thanks,
Patrick Rowling
Life Member USA Shooting
Life Member NRA
Founder "The Scoreboard" BBS (now TargetTalk.org)
Posted: Wed Nov 07, 2012 10:49 am
by tqb
If anyone wants the Pardini PGP 75 1st version manual, send your email via PM.
I tried to PM pilkguns to give him the manual, but I'm still wainting for a reply.