Page 1 of 1
Hill pump cylinder adapter
Posted: Tue Sep 25, 2012 9:52 am
by Kloss
Hi guys,
I just got a Hill pump from Pyramid Air. I figure out that the adapter for the cylinder is missing.
Now, I understood from Pyramid Air customer service's email, they are not going to send me an adapter.
Do you have any idea which adapter is included in the box? So i will buy a new one. Obviously not from Pyramid Air.
Thanks.
Posted: Tue Sep 25, 2012 10:25 am
by David Levene
When I had a Hill pump, many years ago before I ditched it in favour of a tank, I just screwed the adaptor that came with the gun straight into it.
Posted: Tue Sep 25, 2012 12:44 pm
by Kloss
I know it is supposed to be one in the box,the problem they don't want to send it.
Posted: Tue Sep 25, 2012 1:25 pm
by David Levene
Kloss wrote:I know it is supposed to be one in the box
Mine didn't.
So does the gun's adaptor screw into the one you say you are missing?
Posted: Tue Sep 25, 2012 2:44 pm
by Kloss
Nope. A friend recharged my cylinders with his Hill pump and the adapter came with the pump.
Posted: Tue Sep 25, 2012 2:51 pm
by David Levene
Kloss wrote:Nope. A friend recharged my cylinders with his Hill pump and the adapter came with the pump.
Interesting.
What make of cylinder? Steyr, Morini, Walther, Matchguns etc all need different adaptors.
Posted: Tue Sep 25, 2012 3:11 pm
by David Levene
David Levene wrote:I just screwed the adaptor that came with the gun straight into it.
Thinking back, there might have been a DIN adaptor that screwed into the pump, and then the gun's adaptor screwed into that.
(It just shows how often I used it before deciding it was too much like hard work)
Posted: Tue Sep 25, 2012 6:33 pm
by Kloss
David Levene wrote:Kloss wrote:Nope. A friend recharged my cylinders with his Hill pump and the adapter came with the pump.
Interesting.
What make of cylinder? Steyr, Morini, Walther, Matchguns etc all need different adaptors.
Nope. They don't. They are all standard 200 DIN; and it is what my pump is missing.....Thanks Pyramid Air.... even not be able to tell me what adapter I needed.
Posted: Tue Sep 25, 2012 7:09 pm
by Gwhite
Pyramyd is pretty weird on this. They show & describe the pump without the DIN adapter (which is a standard accessory if you order from Pilkguns). As a matter of fact, Pyramid doesn't mention the need for one, or list a DIN adapter as an extra cost accessory for the Hill pump. They sell one from AirArms for $25, but don't mention using it for the Hill pump.
Posted: Tue Sep 25, 2012 8:00 pm
by Kloss
You know, the problem is not if the adapter should have been in the box or not; it is that after you pay, they don't care. They don't want to answer a simple question.
I asked Pilkguns what I was supposed to need. In 5 minutes I received an email back.