Page 1 of 1

Pardini SP1 electronic

Posted: Sun Jul 01, 2012 4:59 am
by Greg R
I was having trouble over the weekend with the gun shooting off 2 or 3 shots then nothing. The next bullet would chamber properly but the trigger would not go off. Sometimes the whole 5 would fire no problem then happen again. I checked the screws inside the grip and all were tight, and also changed the batteries which were Lithium ones but no change. Also seen in the book if a couple of the setting were to far clockwise also this may be a problem so backed them off a little and still no change as well. Any ideas?

Posted: Sun Jul 01, 2012 7:18 pm
by dschaller
Have you verified that there is not a mechanical interference that is preventing the trigger from moving back enough to operate? I had a problem with the trigger moving slightly to the rear (got loose), and it was hitting the frame just at the point that the gun would fire. Sometimes it would go off, and other times not. Moving the trigger slightly forward and tightening the screw totally solved the problem.