TargetTalk

I Just felt Like Sharing what im up too,
If you have any questions just ask.

My best before Pictures






This Failed the CC But hook so i decided to go one step better


I Also decided I dont like this stripe

and I dont like the stained color of the wallnut

And the progress I made today


Did Some reshaping where the bolt had damaged the cheek rest








No plug cutters I have are 7/8” inch so I made what I needed on the wood lathe






Below: I cut part of the stock in this picture to make the angle line up better.

Wile im doing all this work I am considering 2 more things

1. i also plan to do a good bedding job or have one done material of choice here will be Devcon

2. If im going to loose im going to look good trying so im going to lazer a couple quotes into the stock and this Picture of a squirrl i found.

And Finished












decided not to have Anything lazered into my rifle yet,

Fantastic job!!!

Can you tell me some details about the finishing paint?
Is it plain wax or did you coloured the stock first?

tsokasn wrote:Fantastic job!!!

Can you tell me some details about the finishing paint?
Is it plain wax or did you coloured the stock first?

It isn't a wax, its made by a company called minwax they make lots of stains wood hardeners sealers and other wood products.
What I used is there semi gloss polyurathane clear coat. I prefer a more natural color over the deep stain anschutz used.

An email i recieved

Hey
Great job !
I'm also doing a custom project, & have a few questions if you don't mind.
I'm planning in putting a different action into an Anschutz stock.
So,
1) what stock model is yours ?

This i am not 100% but i understand it to be a 1900 stock it is newer than the barreled action that i do know.

2) who/ what/ where the adjustable butt hook unit ?

I ordered the Buttplate hook from Masterclass stocks
look here
http://masterclassstocks.com/accessories.html

3) in the 4th pic, what is the white butt pad ?

umm i think what you are seeing it the attaching base i sandend it down wile reshaping the butt to line up with the new plate.

I really like how you re-contorted the forend. It's a very elegant design

Thanks
Mike

thank you this process only took about 4 days there are some things i would like to change like the plugs i made but i am happy with how the stock turned out. i only hope it works out for me next i am still planning to Bed or have bedded.

Now i Have a question of my own does anyone have an oppenion on V-Blocks for Anschutz Rifles? MT Guns Makes them thoughts?

Also the Old Buttplate has been sold to sbrmike

here is the complete rifle before and after

Before


After