Does anyone have an educated guyess as to what size the barrel is on a 1975 Walther GSP 32 caliber?
I hear so much about barrle size i just wondered before i start searching as to what bullet size would be best.
Thanks
Walther Barrel Size
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Barrel Size
Greetings,
Most Walther barrels I have measured gauge out at 0.314".
Slug the barrel with a pure lead bullet and measure it with an accurate micrometer, not dial or digital calipers.
Alternately, take the barrel to a Precision Machine Shop and ask if they have either an Intrimik or Holchek three legged internal micrometer. Since Walther uses six groove barrels, the measuring legs will fit between the lands to accurately measure the bore.
Cheers,
Dave
Most Walther barrels I have measured gauge out at 0.314".
Slug the barrel with a pure lead bullet and measure it with an accurate micrometer, not dial or digital calipers.
Alternately, take the barrel to a Precision Machine Shop and ask if they have either an Intrimik or Holchek three legged internal micrometer. Since Walther uses six groove barrels, the measuring legs will fit between the lands to accurately measure the bore.
Cheers,
Dave