Bloop tube help

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
oddsonjjf
Posts: 54
Joined: Fri Feb 04, 2011 11:19 am
Location: East Coast-MD

Bloop tube help

Post by oddsonjjf »

ok,
needs some help w/ bloops. got the idea about sight picture enhancement. Any advice about length? or rational for certain length?? If it it helps thinking about putting one on a 1907 Anschutz. Not sure so give me some info. Thanks !!!
WesternGrizzly
Posts: 278
Joined: Sat Jan 09, 2010 10:43 pm

Post by WesternGrizzly »

How old are you?
Barrel length?
Prone or three position?
oddsonjjf
Posts: 54
Joined: Fri Feb 04, 2011 11:19 am
Location: East Coast-MD

bloop

Post by oddsonjjf »

14 yrs old
3p
26" barrel
WesternGrizzly
Posts: 278
Joined: Sat Jan 09, 2010 10:43 pm

Post by WesternGrizzly »

If you search the site you will find loads of info about bloop tubes, but mainly they have two purposes.
1. When you extend the front sight farther away, it is easier to focus on.
2. When you extend the front sight farther away, you can perceve smaller degrees of sight alignment/sight picture changes.
The general rule of thumb is a 31-40 inch sight radius is about a perfect compromise. (at least that's the number that comes to mind)
I have a 19.6 inch barrel with a 12 inch bloop tube. for a total sight radius of 37 inches.
Sorry if that wasn't much help.
Matt
Eric U
Posts: 140
Joined: Sun Feb 06, 2011 6:40 pm

Post by Eric U »

I've made and sold about 100 bloop tubes and tuner tubes. The vast majority of girls who buy my regular tube opt for the 10" version, with 8" being next most popular. For guys, it is more 12" than anything else. It really is personal preference. and how much extra weight you are comfortable with.

Hope this helps,
Eric U
WesternGrizzly
Posts: 278
Joined: Sat Jan 09, 2010 10:43 pm

Post by WesternGrizzly »

I have one of Eric's tuner tubes. 12 inches in length. I really like it, but it is heavy and I may have to use a carbon fiber tube in standing because my rifle is currently muzzle heavy.
Matt
melchloboo
Posts: 209
Joined: Sun Mar 30, 2008 10:24 pm

Post by melchloboo »

Eric U wrote:I've made and sold about 100 bloop tubes and tuner tubes. The vast majority of girls who buy my regular tube opt for the 10" version, with 8" being next most popular. For guys, it is more 12" than anything else. It really is personal preference. and how much extra weight you are comfortable with.

Hope this helps,
Eric U
Somewhere in there is great material for a joke about whether size matters...
skylark
Posts: 82
Joined: Sat Feb 26, 2011 1:50 pm

Post by skylark »

I'm just going to add a little caveat to Eric's comment:

You're only 14. You're almost certainly still growing. It's important not to put more weight on, especially up front and especially standing, because you see other people doing it and you can manage just about.

melchloboo joked about "size matters" but that sort of peer pressure can be a factor - and it absolutely isn't a reason for a junior to struggle with a gun which is too heavy for them. You'll damage your back.
justadude
Posts: 796
Joined: Thu Jul 22, 2010 11:32 am

Post by justadude »

Before you get all worked up about a tube the first question I ask is how well are you shooting and is it really appropriate?

Tubes help the sight picture, especially for old eyes but they are not some kind of magic wand. If you are shooting say 1140+ on the 120 shot course then a tube might help you find a few points. If you are struggling to break 1040 then you likely would not see much benefit and should be concentrating more on the base fundamentals.

'Dude
User avatar
Jordan1s
Posts: 157
Joined: Sat Nov 06, 2010 7:26 pm
Location: Hawaii
Contact:

Post by Jordan1s »

I kinda have a question regarding this...

How is the sight line measured? From front sight to rear sight? sorry, Im kinda new to bloop tubes.
skylark
Posts: 82
Joined: Sat Feb 26, 2011 1:50 pm

Post by skylark »

The sight line is the straight line from your eye through the rearsight through the foresight and to the target. It's a direction rather than a distance.

Did you mean the site base? That's the distance from the rearsight to the foresight (and obviously it will be different with and without a bloop tube on).
User avatar
Jordan1s
Posts: 157
Joined: Sat Nov 06, 2010 7:26 pm
Location: Hawaii
Contact:

Post by Jordan1s »

would the sight base have an affect on the sight line? ex. would moving the rearsight further from your eye decrease the sight line and magnify aiming errors?
Tim S
Posts: 2060
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Post by Tim S »

Nothing decreases the sight line, it's just there.

However, you're partly correct. A longer sight base makes any wobble in your aim more noticeable than a shorter sight base does. This can help to reduce aiming error; say you misalign the foresight and target by 1mm (from your perspective), the effect on the target is reduced by using a longer sightbase as the angular error of that 1mm is smaller.

But the increase in visible wobble can affect your morale.
USMC0802
Posts: 243
Joined: Mon Jul 12, 2010 10:56 am
Location: DFW Texas

Post by USMC0802 »

Eric was about to deploy and I was in a hurry to buy a tube so I purchase one from ESP. Can't remember how Eric's are made but you can get the 12" from ESP and place the sight anywhere along the tube. However, you have to consider the weight.
There is a carbon tube that someone sells that would be the lightest but I believe the front sight will only mount on the end.
Just keep in mind that if your hold isn't rock solid, you will actually shoot worse with a tube. My guess is that at 14, there will be no benefit for you to add a tube and the extra weight will be a problem. Especially in standing
User avatar
GCSInc
Posts: 246
Joined: Fri Apr 01, 2005 10:49 am
Location: The Ole Mill Range Complex, Griffin GA, USA
Contact:

Thickness

Post by GCSInc »

What's the normal or average thickness of most tubes? It looks like a full length sight base groove would be helpful, but is it really a good idea?

Thanks
justadude
Posts: 796
Joined: Thu Jul 22, 2010 11:32 am

Post by justadude »

I have one of Eric U's tuner tubes. 12" version (I shoot prone only)

The tube has 0.125" walls and sight mounting grooves about 8" (measured from the front) along the top. There are also grooves about 3 1/4" along the bottom so you can mount the front sight underneath and shoot with a scope without changing the resonance of the tuner.

So long as the wall thickness is not so thin as to give the tube a tendency to crack along the sight mounting grooves there does not seem to be any downside to having full length mounting grooves.

Cheers,
'Dude
Thedrifter
Posts: 280
Joined: Thu May 05, 2011 8:26 am
Location: San Antonio, TX

Post by Thedrifter »

melchloboo wrote:
Eric U wrote:I've made and sold about 100 bloop tubes and tuner tubes. The vast majority of girls who buy my regular tube opt for the 10" version, with 8" being next most popular. For guys, it is more 12" than anything else. It really is personal preference. and how much extra weight you are comfortable with.

Hope this helps,
Eric U
Somewhere in there is great material for a joke about whether size matters...
i was just thinking the same thing
Post Reply