Rink grip sizes
Posted: Thu Jun 30, 2011 2:11 pm
I have a medium grip on my Pardini SP that is barely big enough for me. I have to put the palm shelf nearly all the way down to be able to get my hand above the shelf, however it will fit. I also could use a slightly larger grip to force my trigger finger back a little. I have the trigger as far forward as possible and it is still not quite far enough forward.
All this leads me to my question. How much difference is there in size between the medium Rink and the large? My knuckle width is 95mm, which is the size listed on the web site for a large grip, but it is not clear if that is the middle of the width range that should use the large, or if that is the absolute minimum for the large grip. Any insight would be appreciated.
All this leads me to my question. How much difference is there in size between the medium Rink and the large? My knuckle width is 95mm, which is the size listed on the web site for a large grip, but it is not clear if that is the middle of the width range that should use the large, or if that is the absolute minimum for the large grip. Any insight would be appreciated.