Still need help with izh 46 m

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
MUSICALGUNS
Posts: 161
Joined: Tue Apr 26, 2011 6:17 pm
Location: oklahoma

Still need help with izh 46 m

Post by MUSICALGUNS »

Well folks, still having trouble with the izh not firing.

Here is the latest wrinkle. It fires every time when there is not pellet in the chamber. But put a pellet in the chamber and it won't fire.....Except it will sometimes go off when I am closing the latch on the breech, just before it is closed. Any ideas?
philip_T
Posts: 83
Joined: Wed Jan 19, 2011 6:55 pm
Location: Hickory, NC

izh 46m

Post by philip_T »

Before I had my izzy tuned by Mac 1, I had that same issue.
I used a variety of pellets at first and some were tight in the breech.
If I was not careful to really press hard to seat them, it seemed that the gun would
not fire. After checking closely, I noticed that some of the pellets
were deformed by the closing of the breech. This pevented MY gun from
firing. I stopped using the tight/oversized pellets and that helped. I
also polished the breech just a little bit to get rid of any burs and allow the
pellets to seat a bit lower. I currently use RWS Basic pellets with no problem.
MUSICALGUNS
Posts: 161
Joined: Tue Apr 26, 2011 6:17 pm
Location: oklahoma

Post by MUSICALGUNS »

Thanks for the advice. Will give it a try.
Post Reply