TargetTalk

Without going into too much detail, I'm looking for a 4mm front riser. I fully realize this is too small to install a side-set screw. I ordered a AHG from Champion Shooters but it's been discontinued. I know about ESP, Eric U, etc. but not 100% sure where I can find one of these types of risers. Anyone have a clear idea where I can find such a beast?

Believe me, I need this particular sized riser - that should strip out the "are you sure you need that?" questions.

Thanks!

Centra makes one; the set has short and long. Set screws from the top. Well made. Can purchase from Marcus Raab at Centershot; must call after 5:00 pm. Brenzovich may have this item as well. I don't think Eric U has this size, but you can check his website. I purchased a 12mm from him so I wouldn't need the 4mm and the 8mm. His stuff is extremely well made.

dl

HI Telecom'

Gee? Are you sure you need 4mm? That is really short. : ) (I just had to do that)

While Eric U does not list a 4mm riser on his website

http://shop.uptagrafftllc.com/Sight-Riser-Blocks_c2.htm

I would contact him anyhow. Remember that when you are talking to Eric you are talking to THE machinist so while is does not have 4mm blocks as part of his advertised product line he might be able to help you out.

Good Luck,
'Dude