Page 1 of 1
Steyr LP10 Trigger mounting rail diameter
Posted: Thu Sep 02, 2010 4:59 am
by Razorback
Is there any Steyr LP10 owner with a caliper that can help me out by measuring the diameter of the trigger mounting rail?
Im looking for a replacement trigger that will fit on a 4mm mounting rail.
Hints of any other gun brands using 4mm trigger mounting rail is also appreciated.
Thanks
Posted: Thu Sep 02, 2010 5:41 am
by The Doctor
I am not sure of the exact diameter, but the only triggers I think that are available are the standard LP2 trigger (which I prefer), the tec-hro version (which is nasty after a while, particularly with anything close to 500grams trigger weight) and there is a version that mec do that is similar to the morini trigger blade. There is a manel version which I have tried which isn't very good at all for the price!
Other than that, it's make your own time :-) I have experimented with making some slightly wider blades for the existing post, up to 11mm across which certainly do make a difference.
Lee
Posted: Thu Sep 02, 2010 6:12 am
by Seamaster
If your mounting piece is broken, you can get new ones from Steyr pretty much free of charge.
Mine turned from an omega shape to a U shape. Steyr send me a new one four days later free of charge.
Posted: Thu Sep 02, 2010 7:10 am
by Makris D. G.
FWB triggers fit on Steyrs...
Posted: Thu Sep 02, 2010 9:49 am
by Razorback
Seamaster wrote:If your mounting piece is broken, you can get new ones from Steyr pretty much free of charge.
Mine turned from an omega shape to a U shape. Steyr send me a new one four days later free of charge.
I’m not looking for a replacement trigger to a LP10, its for a Hämmerli FP60
Posted: Thu Sep 02, 2010 9:50 am
by Razorback
Makris D. G. wrote:FWB triggers fit on Steyrs...
The FWB Rifle triggers as well or only the LP triggers?
Posted: Thu Sep 02, 2010 12:42 pm
by Makris D. G.
I believe its the same trigger on FWB pistols and rifles.
I refer to this design, used in many FWB models, my coach has it on his LP1.
http://www.pilkguns.com/tenp/DSC04435.jpg
P44 has a different trigger, but I bet it is compatible too...
LP 10 trigger rail
Posted: Thu Sep 02, 2010 10:46 pm
by pistolpakinmama1952
Razorback
To answer your specific question.
The Steyr LP 10 & LP 2 Compact rail measures 157 thousandths. The LP10 trigger is adjustable for up and down travel and rotates.
Re: LP 10 trigger rail
Posted: Fri Sep 03, 2010 3:25 am
by Razorback
pistolpakinmama1952 wrote:Razorback
To answer your specific question.
The Steyr LP 10 & LP 2 Compact rail measures 157 thousandths. The LP10 trigger is adjustable for up and down travel and rotates.
Thanks a lot. That will make the search easier for sure.
Posted: Sun Sep 19, 2010 10:18 pm
by lastman
Hi Razorback,
Did the LP10 trigger fit onto the FP60?
Did you find anything else that fit onto the mounting rail?
Why did you decide to change the trigger on your FP60?
Any info would be appreciated as I am looking at getting one.
Thanks,
