need suggestions for 9mm 147 grain load
Posted: Sat Mar 06, 2010 4:53 pm
Weather finally broke and I can get outdoors again. Back to working up a load for the 147 grain Dardas cast bullets in 9mm. Not having a whole lot of luck. Gun is a SIG P226 that has been shooting sub 1" indoors all winter using lighter cast bullets.
Back outdoors at the short line I tried my 147 grain cast lead load (4.3 grains of Power Pistol and 1.155 OAL -- using Lyman data to arrive at that). Not so much joy. Accuracy ran around 5 inches with a good deal of leading. Rather than continuing on a quest to reinvent the wheel, can anyone suggest a load for the heavy 9mm bullet? At the moment I have both Power Pistol and Titegroup on hand so I'd prefer to stick to those powders if possible but remain open to any suggestions.
As a last note, I take full responsibility for evaluating any suggestions given so feel free to suggest away (in other words, I'll use my own brain to check to my own satisfaction that any load data provided won't vaporize me or disintigrate my gun so feel free to provide whatever works for you without fear of any complaints down the road).
Thank you.
Back outdoors at the short line I tried my 147 grain cast lead load (4.3 grains of Power Pistol and 1.155 OAL -- using Lyman data to arrive at that). Not so much joy. Accuracy ran around 5 inches with a good deal of leading. Rather than continuing on a quest to reinvent the wheel, can anyone suggest a load for the heavy 9mm bullet? At the moment I have both Power Pistol and Titegroup on hand so I'd prefer to stick to those powders if possible but remain open to any suggestions.
As a last note, I take full responsibility for evaluating any suggestions given so feel free to suggest away (in other words, I'll use my own brain to check to my own satisfaction that any load data provided won't vaporize me or disintigrate my gun so feel free to provide whatever works for you without fear of any complaints down the road).
Thank you.