Adjusting rake and cantor on Anshutz

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
SLABS
Posts: 1
Joined: Sat Dec 01, 2007 1:51 pm

Adjusting rake and cantor on Anshutz

Post by SLABS »

OK I know this is probably a dumb one but how do you adjust the rake and cantor on a LP @ Anshutz. I know you have to take the grip off then what?
Top
jipe
Posts: 812
Joined: Wed May 02, 2007 5:50 am

Re: Adjusting rake and cantor on Anshutz

Post by jipe »

SLABS wrote:OK I know this is probably a dumb one but how do you adjust the rake and cantor on a LP @ Anshutz. I know you have to take the grip off then what?
The LP@ has the same frame as the LP10, the adjustments are made in the same way: remove the grip, there are two small screws on the back for cantor adjustement and four on the bottom for rake adjustment.

This is also explained in the user manual of the LP@ and LP10 that can be downloaded from the website of Anschutz and Steyr.
Top
User avatar
Richard H
Posts: 2654
Joined: Mon Mar 01, 2004 11:55 am
Location: Guelph, Ontario
Contact:
Contact Richard H

Post by Richard H »

"Cantor"??? The guy who sings in the synagogue ;)

I take it you mean cant. If it is the same as the Steyr you just adjust the little screws on the frame under the grip. To adjust rake - adjust he the front and back to different levels, for cant adjust the left and right to different levels.
Top
Post Reply

Return to “Olympic Pistol”