Bulged barrel of my SIG Hämmerli P 240

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

sparky
Posts: 644
Joined: Mon Mar 01, 2004 11:44 pm

Re: Bulged barrel of my SIG Hämmerli P 240

Post by sparky »

Dr. Jim wrote:OK just to show off David's work. My old P240 barrel can to me as part of a salvaged gun, I knew the barrel had been damaged, and I was set to core out the breech and install a new chunk of tube. Hesitation kept me from doing it. The barrel had been bulged, the cracks are visible but someone unknown had done a mostly creditable welding job. The pictures show the comparisons (sorry iPad photos) and to show David's work.

Sorry could only get two to move here.

Cheers Jim
Wow, you didn't actually shoot a visibly cracked barrel with a shady welded repair job, did you?
Dr. Jim
Posts: 265
Joined: Mon Aug 18, 2008 3:32 pm
Location: Airdrie, Alberta, Canada

Re: Bulged barrel of my SIG Hämmerli P 240

Post by Dr. Jim »

Actually I put about fifty rounds through it. Functioned fine, gave about two inch group at 25 metres and didn't even lead up. Hardly recommended, I don't have any idea of how much it was shot this way, but the repair was not fresh, and the serial number makes the gun very early manufacture.
astigmat2000
Posts: 37
Joined: Thu Mar 16, 2017 8:41 am
Location: Brittany/France

Re: Bulged barrel of my SIG Hämmerli P 240

Post by astigmat2000 »

Hello friends,
I can only take my hat off in front of David's artwork, wonderful....
My P240 is currently CIP testing and will shortly be shipped back to me. I'm in a hurry to manage to test it at the range. Next time, I'll put picture of my new barrel in here.
You may have a look here as well https://plus.google.com/111575617144220589900
My barrel will be delivered black which is the result of the plasma nitration thermal treatment but other colours are possible in option....
Have a good weekend.
Jacques
astigmat2000
Posts: 37
Joined: Thu Mar 16, 2017 8:41 am
Location: Brittany/France

Re: Bulged barrel of my SIG Hämmerli P 240

Post by astigmat2000 »

Hello friends,
I made a mistake, the pictures and the message that should have been here is there http://ttorg.targettalk.net/viewtopic.php?f=6&t=55767
The barrel is back.... and black
Cheers
Jacques
Post Reply