LP-50 Shroud for scope
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
LP-50 Shroud for scope
What exactly allows Pilkington's LP-50's to take a scope. Can a non-pilk Steyr be modified to take a Weaver mount?
-
Fred Mannis
- Posts: 1298
- Joined: Sun Aug 29, 2004 8:37 pm
- Location: Delaware
Re: LP-50 Shroud for scope
The Pilkington LP50 has a cut out in the barrel shroud which will accept a weaver ring.jzobel82 wrote:What exactly allows Pilkington's LP-50's to take a scope. Can a non-pilk Steyr be modified to take a Weaver mount?
Pilkington sells a modified rail that mounts in place of the rear sight http://www.pilkguns.com/steyrmounts.htm
I mounted a scope on my LP50 as follows:
-remove the rear sight
-machine the bottom of a short length of Weaver or Picatinny rail to fit the pedestal on which the original rear sight was mounted. Use existing screw hole to fasten the rail to the frame. You can drill and tap for another screw if desired