I have a Gehmann pistol pellet trap, it has stopped approx. 14,000 pellets. The stop plate inside is dished about 6mm to 8mm deep from repeated impacts. My LP-10 and 162EI both chrono 480/490 fps. Has anyone else found this with the Gehmann traps?
Gort
Gehmann Pellet Trap for Pistol
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
HibouAttentif
- Posts: 22
- Joined: Thu Apr 17, 2008 3:14 pm
- Location: Ontario, Canada
pellet trap
I had the same issue with mine, using pistols with similar velocity. I removed the steel plate and flipped it over. It does not seem to cause any problems however, even if the plate is bent.
Denis
Ottawa, Canada
Denis
Ottawa, Canada
-
jrmcdaniel
- Posts: 240
- Joined: Wed Feb 09, 2005 1:01 pm
- Location: Grantsville, MD
Perhaps the spring is not working? I put a screw in the backing plate to keep the spring from slipping.
My Gehmann took 18fpe shots without a dent in the plate. I would not recommend it for this as I got a fair amount of splatter cuts in the targets at this power, but the plate worked fine.
The Outers trap will last forever. It is designed for .22lr and even survives outdoors for me.
Best,
Joe
My Gehmann took 18fpe shots without a dent in the plate. I would not recommend it for this as I got a fair amount of splatter cuts in the targets at this power, but the plate worked fine.
The Outers trap will last forever. It is designed for .22lr and even survives outdoors for me.
Best,
Joe