PARDINI SP1 question

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Guest

PARDINI SP1 question

Post by Guest »

I found that there are two variants of Pardini SP1 electronic pistol. The first one is "painted" metalic in the front where are the counter wieights and the second one is all black.

Is this just cosmetic, or one model is more recent than the other one ?

Thanks,

Ned
Guest

Post by Guest »

I forgot to precise that I meant Rapid fire model.
top end
Posts: 88
Joined: Sat Mar 13, 2004 11:35 pm
Location: Darwin, Australia

Post by top end »

The painted front is the later model. Some differences from the previous model (brushed aluminium finish) are; the bolt hold open butten is recessed into a larger countersunk hole, there is a safety lever on the left hand side (this applies to SP New models).
top end
Posts: 88
Joined: Sat Mar 13, 2004 11:35 pm
Location: Darwin, Australia

Post by top end »

The painted front is the later model. Some differences from the previous model (brushed aluminium finish) are; the bolt hold open butten is recessed into a larger countersunk hole, there is a safety lever on the left hand side (this applies to SP New models).
Guest

Post by Guest »

The older electronic modules is known to be real battery hogs. Be sure you get a more recent module.
Post Reply