B-39 Target Dimensions

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
jjgun
Posts: 61
Joined: Wed Jan 24, 2007 12:33 pm
Location: Virginia

B-39 Target Dimensions

Post by jjgun »

Does anyone have the dimensions for a B-39 target?
Ed Hall

Post by Ed Hall »

Hmm...

According to the NRA rulebook, the B-39 has no dimensions...

See Section 4 of the NRA International Pistol rulebook.

However, the USAS rules define the 50 foot Rapid Fire target dimensions under rule USA 6.3.2.4B:

10 ring 58.75mm (+/- 0.2mm)
9 ring 107.52mm (+/- 0.2mm)
8 ring 156.29mm (+/- 0.5mm)
7 ring 205.06mm (+/- 0.5mm)
6 ring 253.83mm (+/- 0.5mm)
5 ring 302.59mm (+/- 0.5mm)

Inner Ten = 28.27mm(+/- 0.2mm).
Black from 5 to 10 rings = 302.59mm.
Ring Thickness: 0.5mm to 1.0mm.
Minimum visible size of target card: 335mm x 335mm
(13.2 x 13.2 inches).
Scoring ring values 5 - 9 are printed in the scoring zones, in vertical lines only. The 10 point zone is not marked with a number. The zone numbers shall be approximately 6mm high and 0.5mm thick (see Figure 4). White horizontal aiming lines replace the ring values at the left and the right side of the target center. Each of the lines is 75.65 mm long and 3.03 mm wide (see Figure 4).

You can find the USAS rules at:

USA Shooting Rulebooks

Look at the Technical rules for target specifications.

Take Care,
Ed Hall
US Air Force Shooting Teams
Bullseye (and International) Competition Things
jjgun
Posts: 61
Joined: Wed Jan 24, 2007 12:33 pm
Location: Virginia

Post by jjgun »

Thanks, Ed. I looked in my NRA Intl Pistol Rules and the ISSF rules and didn't find anything. Didn't think of USAS. Thanks again.....JJ
Ed Hall

Post by Ed Hall »

Yeah, I'm surprised the NRA only lists the target, but has no dimensions.

The ISSF doesn't deal at all with reduced targets. I ran into the same trouble looking for 50 yard Free Pistol targets. That's how I discovered the USAS rules for the reduced targets. I did notice that the USAS doesn't reference by target number, though. So, I quite often check out the National Target site to see what numbers match what discipline.

Glad I was helpful.

Take Care,
Ed Hall
U.S. Air Force Competitive Shooting Teams
Bullseye (and International) CompetitionThings
Post Reply