Pardini HP Scope Bases?

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
dhurt

Pardini HP Scope Bases?

Post by dhurt »

What scope bases seem to provide the best fit/hold on the HP grooves?
Thanks a ton, Dwaine.
Top
Ernie Rodriguez
Posts: 344
Joined: Fri Apr 15, 2005 1:50 pm
Location: Tennessee

Scope Base-Pardini

Post by Ernie Rodriguez »

Dwaine-Call Larry's guns-he carries Pardini and scope base for the SP and HP.
Top
dhurt

Post by dhurt »

Thanks for the info Ernie. I was thinking that the groove might be able to hold onto some rings, without a special base? I guess the special base is needed for the recoil? Thanks again. Dwaine.
Top
Laserdot
Posts: 10
Joined: Fri Jul 20, 2007 9:38 am

Scope Base-Pardini

Post by Laserdot »

I purchased a pair of 30 mm scope bases for the Pardini HP from Larry's guns for under $20.00 as I recall. No matter how tight I tightened them they still moved with the recoil. I then removed them and put a small amount of Locktite in the V grove of the gun and on the scope base, and it has been just fine. No movement.

I also purchased a new Pardini SP from Larry and had him install the $139 scope base. Expensive but what a beautiful piece of engineering.
Top
Post Reply

Return to “Olympic Pistol”