Air Chamber Oil

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
jjgun
Posts: 61
Joined: Wed Jan 24, 2007 12:33 pm
Location: Virginia

Air Chamber Oil

Post by jjgun »

I'm a new AP shoot. Just bought an Izzy. Any recommendations on which oil to use to lubricate the air chamber?
GaryBF
Posts: 111
Joined: Sun Feb 19, 2006 8:46 pm
Location: St. Louis, Missouri

Air Gun Oil

Post by GaryBF »

You should use a synthetic (non-petroleum based) oil with a high flashpoint to prevent the oil from igniting under compression, i.e. "diesel". I suggest using Gamo air gun oil which is available from MidwayUSA. There are other suitable brands and sources as well. Only apply one or two drops every 500 pellets or so.
User avatar
Fred Mannis
Posts: 1298
Joined: Sun Aug 29, 2004 8:37 pm
Location: Delaware

Re: Air Chamber Oil

Post by Fred Mannis »

jjgun wrote:I'm a new AP shoot. Just bought an Izzy. Any recommendations on which oil to use to lubricate the air chamber?
Wealth of information here for a new Izzy owner http://www.airguninfo.com/46index.shtml
mister G
Posts: 147
Joined: Sun Mar 07, 2004 8:09 am

Post by mister G »

Silicone-base oil or, even better, lube is the only thing to use. No petroleum products as, over time, they attack the O-rings and deteriorate them. I learned this the hard way, having to disassemble and replace all the rings in my FAS air gun.
Post Reply