source for FWB 93 parts

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
Greg Derr

source for FWB 93 parts

Post by Greg Derr »

I have a shoting frined who wants some spares for his FWB , any one have a source either in the US or Europe. GREG
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

Greg,
Give us a clue as to where you are - for example in the UK I know of one or two dealers that may be able to help.

Rob.
SteveT
Posts: 287
Joined: Sat Mar 06, 2004 8:17 pm
Location: IL
Contact:

Post by SteveT »

I spoke with Pilkguns a few months ago and they said they could get parts if needed, but they don't stock them because there is not much call.
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Post by David Levene »

RobStubbs wrote: for example in the UK I know of one or two dealers that may be able to help.
I'd be suprised Rob. The 93, and it's components, are section 5 (on the mainland).
JT

Post by JT »

David Levene wrote:
RobStubbs wrote: for example in the UK I know of one or two dealers that may be able to help.
I'd be suprised Rob. The 93, and it's components, are section 5 (on the mainland).

Brought about by Section-8 thinking. ;-)
Greg Derr

Post by Greg Derr »

Thanks for the help. The fellow is looking for a firing pin, recoil spring, and extractor. Any FWB users have any other suggested spares? Greg
User avatar
RobStubbs
Posts: 3183
Joined: Mon Mar 01, 2004 1:06 pm
Location: Herts, England, UK

Post by RobStubbs »

David Levene wrote:
RobStubbs wrote: for example in the UK I know of one or two dealers that may be able to help.
I'd be suprised Rob. The 93, and it's components, are section 5 (on the mainland).
I was thinking the airguns - I don't know model numbers I'm afraid. The point was however that without the posters location it is difficult to reply properly.

Rob.
User avatar
GOVTMODEL
Posts: 649
Joined: Mon Mar 01, 2004 11:14 am
Location: Rhode Island, USA

Re: source for FWB 93 parts

Post by GOVTMODEL »

Greg Derr wrote:I have a shoting frined who wants some spares for his FWB , any one have a source either in the US or Europe. GREG
According to FWB, Brenzovich in Texas is the agent.
Walter
Posts: 101
Joined: Mon Mar 01, 2004 1:50 pm

Post by Walter »

Greg,

I have bought an extractor from Pilks, they have some parts.

Here's a parts supplier in Australia — http://www.forbesws.com.au/Pricelists/FWS.htm

Neal Johnson has some parts available — http://www.nealjguns.com/ss_store/Pisto ... ories.html

Brenzovich.

Feinwerkbau will sell parts directly if there is no agent in the country.

If all else fails, post the question in german to http://www.sportschuetzen-forum.de

—Walter
magyar
Posts: 25
Joined: Tue Dec 14, 2004 2:08 pm

FWB parts

Post by magyar »

Contact the factory at: info@feinwerkbau.de

They sell direct without the need of dealers.
Post Reply