Correct Velocity for an LP10 and Lp50

Frank · Post by **Frank** » Wed Dec 15, 2004 4:14 pm

Could you tell me the FPS for the LP10 and the LP50?

thanks
Frank

Post by **pilkguns** » Wed Dec 15, 2004 6:08 pm

factory settings around 530- 540 fps for LP10, the Lp50 will be any where between 490-510 range

Frank · Post by **Frank** » Wed Dec 15, 2004 8:20 pm

Rustam Bana · Post by **Rustam Bana** » Wed Dec 15, 2004 10:41 pm

pilkguns wrote:factory settings around 530- 540 fps for LP10

Are there be any drawbacks in maintaining 500 ft./sec. for a LP10P?

Rustam

Post by **pilkguns** » Thu Dec 16, 2004 7:34 am

no, whatever makes you happy

Rustam Bana · Post by **Rustam Bana** » Thu Dec 16, 2004 9:27 pm

Thank you.

Rustam

Mark Briggs · Post by **Mark Briggs** » Fri Dec 17, 2004 10:15 pm

Keep in mind that the factory setting is not universal as the factory must comply with the import regulations of many different countries. One example is Canada which imposes a 500fps limit on airguns. As a result, Steyr air pistols exported to Canada are set at the factory to a velocity which is less than 500 fps.

The only sacrifice with lower velocity is perhaps reduced efficiency of the compensator. I've group-tested my LP-10 and found it groups best with rifle pellets in the 485fps range. Each pistol is unique and will have its own optimum velocity.

TargetTalk

Correct Velocity for an LP10 and Lp50

Correct Velocity for an LP10 and Lp50

Thanks nt

Pilkguns