IZH CM-2 rifle problem

A place to discuss non-discipline specific items, such as mental training, ammo needs, and issues regarding ISSF, USAS, and NRA

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Post Reply
PaulB
Posts: 598
Joined: Tue Mar 09, 2004 9:18 am
Location: Charlottesville, VA
Contact:
Contact PaulB

IZH CM-2 rifle problem

Post by PaulB »

During a youth team practice the bolt came out of a CM-2 rifle. Somehow the parts are now in an orientation that is not correct and the bolt cannot be reinserted. It appears to be in a cocked orientation but we cannot reinstall the front part of the bolt. Looking for any suggestions from someone that is more familiar with the CM-2 than me.
Top
Tim S
Posts: 2058
Joined: Mon Jan 03, 2011 11:33 am
Location: Taunton, Somerset

Re: IZH CM-2 rifle problem

Post by Tim S »

Paul

Dies the front rotate independently of the handle? Does that need to be aligned like an Anschutz 64?
Top
User avatar
j-team
Posts: 1381
Joined: Mon Mar 28, 2005 2:48 am
Location: New Zealand

Re: IZH CM-2 rifle problem

Post by j-team »

The striker (the part with the pin the protrudes out the back of the bolt when cocked) needs to be de-cocked (at the bottom of the cam) to re-assemble. Once there just push & turn the front section to re-assemble and cock the bolt in one movement.
Top
Post Reply

Return to “Shooters Lounge”