Scatt on walther lp500

[K9bdh]

Has anyone found a good place to mount a scatt to keep it in the gun verses setting it up all the time and mounting it to the tank?

[PirateJohn]

I thought all SCATTs only ever mounted to the tank

[Gwhite]

That's the most common approach, but you can mount them anywhere as long as it's parallel to the barrel, and is rigid and close enough to the action to pick up the dry fire click. I've 3D printed mounting blocks to clamp on the barrel of my Morini free pistol, for example.

[madmax]

I shoot a Morini 162EI.
My Scatt mounting block is permanently located on the frame where the cylinder screws into main body. The zero is off-target at 10 metres, but it is consistent, so moving the hit point to the centre of the target is easy.
Max.

[Jchurch]

This is what i use for my MantisX. Not sure it’s applicable to a scatt.

[mteinum]

I shoot a Morini 162EI.
My Scatt mounting block is permanently located on the frame where the cylinder screws into main body.

Like this?

IMG_0980-2.jpeg (43.93 KiB) Viewed 1755 times

[k9bdh1975]

On thingverse. They have a part u can 3dprint that attaches to scatt and then snaps on the air tank works well for us