Hi!
I wan't to strip down my recently accuired Pardini SP .22, but I can't figure out how to dismantle the gun? How do I remove the barrel?
I bought the gun complete with tools, spares, case and all, but no manual.
I managed to find info for adjustment og the trigger, but takedown instructions? Can't find anything on the net.
Hope you can help me,
Rittig
(Denmark)
Rittig-at-jubiipost.dk.46750.0
Pardini SP Takedown instructions?
Moderators: rexifelis, pilkguns
-
Doug O
Re: Pardini SP Takedown instructions?
: Hi!
: I wan't to strip down my recently accuired Pardini SP .22, but I can't figure out how to dismantle the gun? How do I remove the barrel?
: I bought the gun complete with tools, spares, case and all, but no manual.
: I managed to find info for adjustment og the trigger, but takedown instructions? Can't find anything on the net.
: Hope you can help me,
: Rittig
: (Denmark)
hi Rittig, here is how i do it on my SP.
1.pull to bolt back and press up on the small pin in front of the magazine. slowly let the bolt foward. it should be locked back.
2. hold the gun with the muzzle upward, remove the hex screw in the hole on the muzzle under the barrel, lift off the barrel assembly and set aside.
3. with the gun pointing down, carefully pull the bolt back towards the grip to release the bolt lock, slowly move the bolt and bolt recoil spring down and out of the frame.
reassembly is reverse of this.
i will email you the diagrams from the manual
please contact me if i can help. Doug Olsen
dougo-at-dock.net.46752.46750
: I wan't to strip down my recently accuired Pardini SP .22, but I can't figure out how to dismantle the gun? How do I remove the barrel?
: I bought the gun complete with tools, spares, case and all, but no manual.
: I managed to find info for adjustment og the trigger, but takedown instructions? Can't find anything on the net.
: Hope you can help me,
: Rittig
: (Denmark)
hi Rittig, here is how i do it on my SP.
1.pull to bolt back and press up on the small pin in front of the magazine. slowly let the bolt foward. it should be locked back.
2. hold the gun with the muzzle upward, remove the hex screw in the hole on the muzzle under the barrel, lift off the barrel assembly and set aside.
3. with the gun pointing down, carefully pull the bolt back towards the grip to release the bolt lock, slowly move the bolt and bolt recoil spring down and out of the frame.
reassembly is reverse of this.
i will email you the diagrams from the manual
please contact me if i can help. Doug Olsen
dougo-at-dock.net.46752.46750