pardini front sight

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
tonyd123
Posts: 3
Joined: Thu May 10, 2018 9:21 am

pardini front sight

Post by tonyd123 »

i have a pardini p75 free pistol. The whole front sight assembly is very loose, not the blade but whole thing. Tried green locktite but no luck. any help would be appreciated. thanks. tony donofrio
Top
william
Posts: 1470
Joined: Mon Mar 01, 2004 12:31 pm
Location: New Hampshire, USA

Re: pardini frony sight

Post by william »

Have you gone to the source?
Top
Gwhite
Posts: 3445
Joined: Sat Sep 04, 2004 6:04 pm
Location: Massachusetts

Re: pardini front sight

Post by Gwhite »

There is a set screw under the front sight. I assume you tried tightening that?

If that is stripped, I've seen one with four short set screws drilled & tapped on the sides.
Top
Greg Derr
Posts: 422
Joined: Thu Dec 01, 2005 7:45 am

Re: pardini front sight

Post by Greg Derr »

Remove the front sight, then the sight assembly. Paint the area under the assembly that is under the set screw. Allow the set screw to mark the area. Now mill or drill a detent for the sight assembly set screw to nest in. This should solve the problem. The set screw is metric not SAE.
Top
tonyd123
Posts: 3
Joined: Thu May 10, 2018 9:21 am

Re: pardini front sight

Post by tonyd123 »

Thank you all for info.
Top
Post Reply

Return to “Olympic Pistol”