Anschutz barrel measurements

[alanms]

Hello all,
Technical question about my rifle.
Do any of you happen to know the barrel diameter of an Anschutz 1413 ( circa 1974) ?
I’m considering a tuner and I unfortunately do not have a micrometer readily available. The length appears to be 27 1/4” and my handy dandy ruler shows the barrel tip to be just a hair under 1”. I just want to be exact for the order.
Thank you in advance.

[Tim S]

This may not be what you want to hear, but you really need to measure your barrel, not rely on someone else's.

[alanms]

Yeah, I figured that might be the case.
Just thought there was a “standard” measurement for stock barrels. Trying to avoid having to go buy a micrometer. Thanks for the reply, it’s appreciated.

[spektr]

Dont buy a Mic, Buy a digital Caliper...... 10 bucks at harbor freight, its good enough

[devi]

Mine one measures 0,96 inch, 24,4mm.

But is better to measure your own barrel.

[40xguy]

you buy a cheap measuring tool, chances are you'll get an erroneous measurement.
find someone who has a quality tool because,
if you're off by a few thousandths, it won't fit (don't ask me how I know this).

[alanms]

Thank you all for the help.
I didn’t realize that calipers/ micrometers were that inexpensive. I’d never looked for one and just had it in my head they were upwards of$100.
Thanks again for the quick replies, advice, and Devi for the pics. Looks like I’m off to the store.
Stay safe all.

[devi]

Thank you all for the help.
I didn’t realize that calipers/ micrometers were that inexpensive. I’d never looked for one and just had it in my head they were upwards of$100.
Thanks again for the quick replies, advice, and Devi for the pics. Looks like I’m off to the store.
Stay safe all.

You are welcome!

I'm interested on a sintonizer also. If you find one which fits, please share.