Smallbore Stock Width - Survey

[lyoke2]

Hello,

I am doing a bit of research on stock widths.

I am looking for the width of the fore-end of the following stocks:

Anschutz – 1918/2018 Alu, 54 Wood
EC – Universal
Walther – KK500 – Wood and Aluminum
Tec Hro – Fanatic
MEC – Mark 1


If you have any one the measurements, please let me know.

Thanks!

[bberg7794]

1.576" wide for the Anschutz 1918 Precise. If it matters, it is not 1.576" flat across the bottom, but has a 'U' shaped profile. It is quite narrow at the bottom where the hand stop attaches.

BB

[lyoke2]

Awesome! Thank you so much!

This is very helpful!

[Tim S]

For wood-stocked 54s, my 1613 is 2.28in, and my 1811 is 1.925in.

[lyoke2]

Great!

Thank you!

[pfiori]

Lake,

The Anschutz 2018 stock that I have here is 1.732" wide. The 1918 and 2018 stocks are not the same width as noted above.

Pete

[lyoke2]

Interesting,

Pete do you have the newer black alu precise stock?

Perhaps the other size is the older silver precise stock? Or vice versa.

I appreciate the input.

[Tim S]

Interesting,

Pete do you have the newer black alu precise stock?

Perhaps the other size is the older silver precise stock?

I think the 2018 is a little wider than the 1918, reflecting the width of Anschutz round and square actions. I'm sure I was told the 2018 would accept a Bleiker action, but the 1918 would not.

[High Left]

For ref:
'73 1411: 2.30"
2313 (cast), and 2013 (stepped forearm) are both 2.20"

[lyoke2]

Thank you!

[Th.]

Mec mark 1 1.658 inch

[lyoke2]

Thanks I was missing the MEC

[groverdog1]

universal concept / EC Stock is 1.9"

[SRay53txtn]

universal concept / EC Stock is 1.9"

Confirmed on mine as well.