Front Apeture for 10M

old, good http://www.midcoast.com/~pilkguns/bbs/

Moderators: rexifelis, pilkguns

Post Reply
TJ

Front Apeture for 10M

Post by TJ »

What is the optimum front apeture size for a Anschutz 2002CA for 10m?
shootingsports-at-ev1.net.45596.0
X

Re: Front Apeture for 10M

Post by X »

Depends on the distance from your eye to your front apeture and also just what you are comfortable with.
I'm gonna generalize and say that anything below 4 is too small.

.45597.45596
Val

Re: Front Apeture for 10M

Post by Val »

: What is the optimum front apeture size for a Anschutz 2002CA for 10m?
That is VERY shooter-specific. Depends not only on your hold, but on the on other factors as well. The only way to find out your optimal front aperture size is to monitor your performance while reducing the apperture from the widest to the narrowest (the process may take some time).
Keep in mind, that a bit narrower than optimal aperture is much worse than a bit wider than optimal.
.45598.45596
TJ

Re: Front Apeture for 10M

Post by TJ »

Thanks X!
I like generalities. They are great starting points or limits.
: Depends on the distance from your eye to your front apeture and also just what you are comfortable with.
: I'm gonna generalize and say that anything below 4 is too small.

shootingsports-at-ev1.net.45599.45597
Matt Emmons

Re: Front Apeture for 10M

Post by Matt Emmons »

Here's how you find out what size to use: try different ones and shoot ten-shot groups. Look for two things - what allows you to take the shot comfortably and call your shot well, and look at your group size. That will pretty much tell you what to use. Try apetures between 3.8 and about 4.2.
Good luck and good shooting,
Matt
.45718.45596
Post Reply