Anyone know of a good source for IZH-46M parts besides EAA?
I need breech o-seals, no. 19 on the schematic.
shootingsports-at-ev1.net.45156.0
IZH-46M seals
Moderators: rexifelis, pilkguns
-
Vynce
Re: IZH-46M seals
My notes from a post by someone several months ago indicate that a 2mm thick by 5mm diameter o-ring from a hardware store should work fine. You might need to try a few to find one that actually fits properly. I haven't needed to change my seals yet so I haven't verified this info.
Hope that helps
.45158.45156
Hope that helps
.45158.45156
-
JT
Re: IZH-46M seals
That is interesting since the seals are beveled. I will give it a try.
Thanks you. Tom
: My notes from a post by someone several months ago indicate that a 2mm thick by 5mm diameter o-ring from a hardware store should work fine. You might need to try a few to find one that actually fits properly. I haven't needed to change my seals yet so I haven't verified this info.
: Hope that helps
shootingsports-at-ev1.net.45172.45158
Thanks you. Tom
: My notes from a post by someone several months ago indicate that a 2mm thick by 5mm diameter o-ring from a hardware store should work fine. You might need to try a few to find one that actually fits properly. I haven't needed to change my seals yet so I haven't verified this info.
: Hope that helps
shootingsports-at-ev1.net.45172.45158