Ramped barrel High Standard?

Brought to you by Zero Bullet Company Inc.

Moderators: pilkguns, m1963, Isabel1130

Post Reply
Chuckiep
Posts: 51
Joined: Thu Oct 23, 2014 1:49 pm

Ramped barrel High Standard?

Post by Chuckiep »

Somebody know the contact info for the guys that make the "NEW" high standard .22s? they had them at perry this year (2016) i thought i was interarms... but google brings up nothing.
Fletch
Posts: 5
Joined: Mon Jan 18, 2016 11:16 am

Re: Ramped barrel High Standard?

Post by Fletch »

Is it not these guys?

https://www.highstandard.com/

High Standard
5151 Mitchelldale St B-14
Houston, TX 77092
713-462-4200
jglenn
Posts: 68
Joined: Tue Apr 28, 2015 5:53 pm
Location: Monroe Ga

Re: Ramped barrel High Standard?

Post by jglenn »

try Alan Aronstein at 713-476-0888
Chuckiep
Posts: 51
Joined: Thu Oct 23, 2014 1:49 pm

Re: Ramped barrel High Standard?

Post by Chuckiep »

I don't think it's highstandard.com I think it was an off brand company either copying a HS or making upgrades to them. They had several options and barrel types. That company also machines their own hammerli 208 slides.
Chuckiep
Posts: 51
Joined: Thu Oct 23, 2014 1:49 pm

Re: Ramped barrel High Standard?

Post by Chuckiep »

So... I called high standard and they said, that the guys at Perry were not authorized to be there using the interarms name. They told me the guy selling these got fired form high standard over a year ago.
Chia
Posts: 359
Joined: Thu Aug 18, 2016 7:53 am

Re: Ramped barrel High Standard?

Post by Chia »

Depending on the specific issue you're having (i.e. did they pretend to be someone they were not allowed to be), you may wish to talk to an attorney in your state about the issue. It sounds like you may have some characters there.

Products liability lawyers eat characters like them for breakfast.
Misny
Posts: 993
Joined: Tue Mar 02, 2004 9:28 pm
Location: Indiana

Re: Ramped barrel High Standard?

Post by Misny »

Chia wrote:Depending on the specific issue you're having (i.e. did they pretend to be someone they were not allowed to be), you may wish to talk to an attorney in your state about the issue. It sounds like you may have some characters there.

Products liability lawyers eat characters like them for breakfast.
I remember, many years ago, on the old Bullseye-L list reading about many people having trouble receiving their 10X guns from Houston High Standard and being given a big run around. I was in the market for a new .22 pistol and was considering the 10X. After all posts from the upset Houston Hi Standard customers, I decided to buy a Hammerli 208s instead. It didn't sound like there was much "character" there then at Houston Hi Standard, and I wouldn't put much stock in what the officers of Houston Hi Standard say, if they are the same people. I used to be a High Standard fan and owned a couple of their pistols, but have steered clear of them for decades.
jglenn
Posts: 68
Joined: Tue Apr 28, 2015 5:53 pm
Location: Monroe Ga

Re: Ramped barrel High Standard?

Post by jglenn »

I gave you who to call....
waxman
Posts: 94
Joined: Sat Jul 14, 2007 8:44 pm
Location: Dumbass New York State

Re: Ramped barrel High Standard?

Post by waxman »

Love the idea of a "ramped" barrel for older HS pistols if it mitigates the fussy magazine lip issue.
User avatar
nglitz
Posts: 182
Joined: Sun Mar 07, 2004 10:48 am
Location: Hamilton Square NJ

Re: Ramped barrel High Standard?

Post by nglitz »

I've seen a couple of variations on homemade ramped barrels for HS. One involved adding a bit of weld in the right place, another was a bit of a screw into a hole drilled in the breechface. Both involved a lot of hand shaping for a minimal ramp. Obviously, some care needed to be taken in placing the weld/tapped hole.

With a little magazine tuning, my old Hartford model feeds as well as either of them did. One misfeed in the last three 2700.
Norm
in beautiful, gun friendly New Jersey
waxman
Posts: 94
Joined: Sat Jul 14, 2007 8:44 pm
Location: Dumbass New York State

Re: Ramped barrel High Standard?

Post by waxman »

Thanks, nglitz. I suppose no manufacturer/smith sees the profit in making a HS barrel with an integral ramp.
My HS guns have at times, worked flawlessly also. But then, during a match, fail causing refires. Magazine tuning is not something a shooter wants or needs. IMHO, a ramped barrel would bring a lot of old HS pistols out of the gun safe, and on the line where these fine guns belong.
jglenn
Posts: 68
Joined: Tue Apr 28, 2015 5:53 pm
Location: Monroe Ga

Re: Ramped barrel High Standard?

Post by jglenn »

here's thread by alan on the ramped barrel... he was the guy at Perry this year and used to work for HS..

http://www.rimfirecentral.com/forums/sh ... p?t=721313

he may well also be doing the 208 slides..

http://www.rimfirecentral.com/forums/sh ... highlight=

here's one of the slides
http://www.ebay.com/itm/Hammerli-Style- ... SwJb9WqPbI
Chuckiep
Posts: 51
Joined: Thu Oct 23, 2014 1:49 pm

Re: Ramped barrel High Standard?

Post by Chuckiep »

JGLEN, thank you but he will not return my calls.
jglenn
Posts: 68
Joined: Tue Apr 28, 2015 5:53 pm
Location: Monroe Ga

Re: Ramped barrel High Standard?

Post by jglenn »

try a PM on the Rimfirecentral HS forum
mr alexander
Posts: 203
Joined: Sun Oct 16, 2011 2:47 pm

Re: Ramped barrel High Standard?

Post by mr alexander »

chuckiep,

Try contacting Alan Aronstein at: www.interarmstx.com

Or call him again at 713-476-0888 as "jglenn" suggested.

For those of you who are High Standard fans, the following may be of interest:

http://www.rimfirecentral.com/forums/sh ... p?t=724369 (See Posting #10).

http://www.rimfirecentral.com/forums/sh ... p?t=712961 (See Posting #1).
Post Reply