Morini 162E grip angle adjustment
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
tedloehrke
- Posts: 7
- Joined: Sat Mar 13, 2010 10:35 am
- Location: Wisconsin
Morini 162E grip angle adjustment
Been a member here for a while just have not posted much. I am wondering if there is a way to adjust the grip angle on an older Morini 162E is order to raise or lower the barrel in relation to your wrist angle? I would like to have my wrist tipped slightly downward when in the shooting stance and don't know if this is possible or permissable.
Re: Morini 162E grip angle adjustment
Hi!
The 162EI cannot be adjusted readily due to the electronics being fixed to the frame. Any changes with the 162EI would likely have to be a result of changing the grip form and ergonomics.
The pinch point: you are likely to blow through the pinky area if you want to increase the rake of the fingers much more than a 3-4mm delta judging by my medium grip.
The 162E is probably even tighter due to the 15V battery.
The 162EI cannot be adjusted readily due to the electronics being fixed to the frame. Any changes with the 162EI would likely have to be a result of changing the grip form and ergonomics.
The pinch point: you are likely to blow through the pinky area if you want to increase the rake of the fingers much more than a 3-4mm delta judging by my medium grip.
The 162E is probably even tighter due to the 15V battery.
