All of a sudden my scatt software decided to act strange..
I can start the program but when I try to start a practice session it just freezes.
I've tried reintstalling but same problem. Unhook everything. Same problem.
Any ideas?
Scatt not working..
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Re: Scatt not working..
Nevermind, proper cussing and glaring at it made it function properly!
Re: Scatt not working..
ehm, nope, now its back to not working again. wtf!
Device not found or just freeze when I try to hit the Start Practice-button..
Device not found or just freeze when I try to hit the Start Practice-button..
Re: Scatt not working..
New driver perhaps.
Re: Scatt not working..
It may not be the software.
Check all cables and connectors carefully for damage. If a cable has been walked on, sharply bent, or pinched, it could be damaged inside. If possible, use a continuity tester to verify that the cables are in good shape.
Be sure the cable connectors are clean and securely seated in their sockets. Also try swapping the long cable end for end. Sometimes the connectors just fit better one way over the other.
Try a different USB port on the computer.
You didn't mention if you have the USB or the wireless model. If wireless, be sure the sensor unit is charged.
If none of that works, you're probably at the point of swapping components. If you can borrow a target unit, sensor, and a target control unit, swap them in one at a time and see if the system works. If you can't borrow components, contact Scatt to see if they have any diagnostic procedures or tools.
Curlyjim
Check all cables and connectors carefully for damage. If a cable has been walked on, sharply bent, or pinched, it could be damaged inside. If possible, use a continuity tester to verify that the cables are in good shape.
Be sure the cable connectors are clean and securely seated in their sockets. Also try swapping the long cable end for end. Sometimes the connectors just fit better one way over the other.
Try a different USB port on the computer.
You didn't mention if you have the USB or the wireless model. If wireless, be sure the sensor unit is charged.
If none of that works, you're probably at the point of swapping components. If you can borrow a target unit, sensor, and a target control unit, swap them in one at a time and see if the system works. If you can't borrow components, contact Scatt to see if they have any diagnostic procedures or tools.
Curlyjim
Re: Scatt not working..
Hmm, doesn't work for me with Obama.DanielSwe wrote:Nevermind, proper cussing and glaring at it made it function properly!
Re: Scatt not working..
Thanks Curly, will do that. I have the wireless unit, and fortunately we have another at the club. Will swap parts with that one to see.
The green tracer is acting up now. It restarts all of a sudden in the mmiddle och sighting. So some of the shots are timed at 8-10 seconds, some are 0-3 seconds.
Rover: Doesn't work over here either, something seriously wrong when a bit of cussing don't solve the problem I think! :)
The green tracer is acting up now. It restarts all of a sudden in the mmiddle och sighting. So some of the shots are timed at 8-10 seconds, some are 0-3 seconds.
Rover: Doesn't work over here either, something seriously wrong when a bit of cussing don't solve the problem I think! :)
Re: Scatt not working..
Rover, get one of these instead... ;)Rover wrote:Hmm, doesn't work for me with Obama.DanielSwe wrote:Nevermind, proper cussing and glaring at it made it function properly!
- Attachments
-