Morini CM84E grub screw

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
User avatar
markwarren
Posts: 69
Joined: Sun May 22, 2011 4:41 pm
Location: Crewe, England, UK

Morini CM84E grub screw

Post by markwarren »

Hi,

Does anyone know the size of the grub screw which holds the 'moderator' on to the barrel. I can find the part number from their website but no mention of its size.

Many thanks

Mark
Top
imbecile
Posts: 16
Joined: Tue Oct 28, 2008 9:48 am

Re: Morini CM84E grub screw

Post by imbecile »

markwarren wrote:Hi,

Does anyone know the size of the grub screw which holds the 'moderator' on to the barrel. I can find the part number from their website but no mention of its size.

Many thanks

Mark
If measured with caliper 5x5mm.
Top
User avatar
markwarren
Posts: 69
Joined: Sun May 22, 2011 4:41 pm
Location: Crewe, England, UK

Re: Morini CM84E grub screw

Post by markwarren »

Thank you for your reply. Do you know what size tool is needed to remove it e.g. M3, M2,5 etc

Thank you

Mark
Top
Nev C
Posts: 89
Joined: Thu Feb 09, 2006 6:53 am
Location: Melbourne, Australia

Re: Morini CM84E grub screw

Post by Nev C »

markwarren wrote:Thank you for your reply. Do you know what size tool is needed to remove it e.g. M3, M2,5 etc

Thank you

Mark
Mine takes a 2.5 mm Allen key
Top
User avatar
markwarren
Posts: 69
Joined: Sun May 22, 2011 4:41 pm
Location: Crewe, England, UK

Re: Morini CM84E grub screw

Post by markwarren »

Thanks for the replies chaps :)
Top
Post Reply

Return to “Olympic Pistol”