Need info on CO2 filling from paint ball tanks
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
-
continental
- Posts: 13
- Joined: Sun Apr 26, 2009 7:35 am
- Location: northwest Pennsylvania
Need info on CO2 filling from paint ball tanks
I have a Walther CPM-1 and my bulk tank is long out of hydro-test. As an alternate to retest/refill my bulk tank, I am wondering if anyone has used the 20 and 24 ounce CO2 bulk tanks they sell for paint ball. It seems I would need an adapter and so am wondering if anyone has gone down this route and can advise me on the correct adapter or a source for such an item. I did speak with two retailers who sell the paintball tanks and they have no adapters nor advice. Thanks in advance for any help.
Re: Need info on CO2 filling from paint ball tanks
I'm not sure what would be required, but these folks would know if it is do-able, and would probably have the hardware:
http://www.bestfittings.co.uk/
http://www.bestfittings.co.uk/
-
continental
- Posts: 13
- Joined: Sun Apr 26, 2009 7:35 am
- Location: northwest Pennsylvania
Re: Need info on CO2 filling from paint ball tanks
Gwhite - thank you....very interesting website. I will send them an email and see what develops Thanks again for the tip./Frank