Changing seals in Walther Air rifle

Moderators: pilkguns, Marcus, m1963, David Levene, Spencer

Post Reply
John Lewis

Changing seals in Walther Air rifle

Post by John Lewis »

I currently own a LG-90. Does anyone know how long the seals typically last or how to change them? Are there any signs I should look for to tell me when I need to change them? Any information would be great. Thanks
Jim E
Posts: 592
Joined: Thu Mar 25, 2004 5:57 pm
Location: Westlake Village, CA

LG-90 Seals

Post by Jim E »

John -

The Walther's LG-90 is a high quality match air rifle worthy maintaining and capable of competent scores in the right hands. Not sure which seals (breech or compression chamber) your concerned about. Some initial suggestions.

1. To test the compression chamber seal, cock the rifle and let set over night. It should hold adequate pressure to shoot as if it just had just been cocked. Listening for air leaks after cocking is another test.

2. If you have access to a chronygraph the LP-90 with mid-7 weight pellets (say Vogel Yellow's) should be in the 570 fps range. (plus or minus 20 fps or so). Shoot at least a ten shot string paying attention to velocity consistency (big changes are no good). Anything below ~530 is problematic.

3. No chrony, then cock/load and shot the LG-90 but with a piece of tissue paper over the breech. It the tissue leaps off the breech when fired, a sign these seals may need attention.

4. Pellet holes through a proper functioning match air rifle/pistol should be clean/crisp. If ragged, good sign velocities have dropped to the point where maintenance/seals are required.

Not sure but if you need seals perhaps our host can handle the maintenance. If not, Champions Choice certainly can.

Jim
Sharpsman
Posts: 3
Joined: Wed May 14, 2014 7:52 pm
Location: North Louisiana

Walther LG90

Post by Sharpsman »

I've checked several repair places for Walther pellet rifles but have not had luck finding seals for my rifle! If anyone knows an outlet that does stock same I'd certainly appreciate a reply! Champion's Choice no longer stocks seals for this rifle.

Thank you!
GOD BLESS AMERICA!
User avatar
Gadican
Posts: 11
Joined: Wed Apr 07, 2010 6:28 pm
Location: Seward, NE

Post by Gadican »

Try Alan Zasadny. The last phone number I have for him is 319-334-7261. Very awesome air gunsmith with many resources and an outstanding field target rifle shooter.
Sharpsman
Posts: 3
Joined: Wed May 14, 2014 7:52 pm
Location: North Louisiana

Post by Sharpsman »

Gadican wrote:Try Alan Zasadny. The last phone number I have for him is 319-334-7261. Very awesome air gunsmith with many resources and an outstanding field target rifle shooter.
Thanks!
GOD BLESS AMERICA!
Post Reply