How High To Hang 10M AP Target?
Moderators: pilkguns, m1963, David Levene, Spencer, Richard H
-
- Posts: 13
- Joined: Thu Oct 24, 2013 10:07 pm
- Location: NC, United States
How High To Hang 10M AP Target?
What is the regulation height one should hang a 10M AP target? Yes, newb-type question; please bear with me. I have searched for this information on the Web and never came up with an answer.
6.4.6.1 Height of Target Centers
Target centers must be within the following heights when measured from the level of the firing point floor:
Range Standard Height Variation Allowable
300m 3.00 m +/- 4.00 m
50m 0.75 m +/- 0.50 m
25m 1.40 m + 0.10 m / - 0.20 m
10m 1.40 m +/- 0.05 m
50m Running Target 1.40 m +/- 0.20 m
10m Running Target 1.40 m +/- 0.05 m
All target centers within a group of targets or range must have the
same height (±1 cm)
Get the full rules here:
http://www.issf-sports.org/theissf/rules.ashx
Hope this helps
Target centers must be within the following heights when measured from the level of the firing point floor:
Range Standard Height Variation Allowable
300m 3.00 m +/- 4.00 m
50m 0.75 m +/- 0.50 m
25m 1.40 m + 0.10 m / - 0.20 m
10m 1.40 m +/- 0.05 m
50m Running Target 1.40 m +/- 0.20 m
10m Running Target 1.40 m +/- 0.05 m
All target centers within a group of targets or range must have the
same height (±1 cm)
Get the full rules here:
http://www.issf-sports.org/theissf/rules.ashx
Hope this helps
-
- Posts: 13
- Joined: Thu Oct 24, 2013 10:07 pm
- Location: NC, United States
Information Greatly Appreciated
Thank you. I bookmarked the ISSF link you provided.
http://www.pilkguns.com/buildrange.shtml
That says 55 inches height for the 10 ring. So that's what I did.
That says 55 inches height for the 10 ring. So that's what I did.
55 inches x 2,54 = 139,7cm » 1,397 meters (for those who don't speak metric)ihasagun wrote:http://www.pilkguns.com/buildrange.shtml
That says 55 inches height for the 10 ring. So that's what I did.
It´s within the tolerance allowed. Your range is ok.
Hope this helps