I can now use my new LP10

If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true

Moderators: pilkguns, m1963, David Levene, Spencer, Richard H

Forum rules
If you wish to make a donation to this forum's operation , it would be greatly appreciated.
https://www.paypal.com/paypalme/targettalk?yours=true
Post Reply
User avatar
jackh
Posts: 802
Joined: Sat Sep 25, 2004 8:51 pm
Location: Oregon USA

I can now use my new LP10

Post by jackh »

I can now use my new LP10
(refer to here viewtopic.php?t=38920 )
The scuba tank problem was resolved with a new tank. This one will accept the 200 din Steyr adaptor threads plus the 300 din Hammerli adaptor. The dive shop guy says they might be able to swap a 200 din valve onto my old tank, IF the tank threads are the right size. But the cost of that and a hydro is near the cost of the new smaller, lighter tank I just got. Am I the only one in Oregon with two air gun scuba tanks?

Now to further address the grip fitting.
Top
Chris
Posts: 381
Joined: Fri Mar 12, 2004 11:03 pm
Location: OR

Post by Chris »

I only have one tank and use it to fill my 10yr old plus cylinders on my LP10. If I decided to go to a larger match run by USAS I will have to buy some new cylinders before I travel.
Top
David Levene
Posts: 5617
Joined: Mon Mar 01, 2004 12:49 pm
Location: Ruislip, UK

Post by David Levene »

You should be OK until December.
Top
Post Reply

Return to “Olympic Pistol”